Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton bay ceiling fan lights & fan not operating
[ 17 Answers ]
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
Hampton Bay Outdoor Lights
[ 3 Answers ]
:confused: I cannot figure out why my Hampton Bay outdoor lights will not turn off when I set them to auto-off after two hours. They stay on all the time now.
New hampton bay motor not working, lights work
[ 3 Answers ]
Hi - I just installed a new hampton bay carriage house II 52" ceiling fan with light assembly (no remote; pull strings for lights and fan, and two position fan switch). I used the wiring from a previously existing ceiling light. I tested the wiring by running them to a grounded plug assembly,...
Hampton Bay CF: fan works, lights don't
[ 3 Answers ]
I hung a hampton bay ceiling fan (Huntington III), controlled by a simple single light switch, and the fan works well, but the lights do not work at all. I wired white to white, black to black, green and blue to outlet box ground. I am guessing that it's a manufacturer's defect, since it is getting...
1995 Nissan Altima Brake Lights stay on
[ 1 Answers ]
My Altima's brake and parking lights stay on. I have taken the fuse out until I have the problem fixed. I checked under the dash and there are several switches located there. Not sure which one is for the brake light. Any suggestions?:mad: View more questions Search
|