Ask Experts Questions for FREE Help !
Ask
    qbertt's Avatar
    qbertt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 3, 2006, 10:56 AM
    Faucet replacement
    I have a faucet I need to replace. I only have a cold water line to use. The faucet I have has both cold and hot water hook ups. Am I able to use this faucet?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jan 3, 2006, 12:12 PM
    Hey Bert,

    Quote Originally Posted by qbertt
    I have a faucet I need to replace. I only have a cold water line to use. The faucet I have has both cold and hot water hook ups. Am I able to use this faucet?
    Yes, You can cap off the hot water supply on the faucet and you'll be fine.
    Another option would be to install a single chrome faucet (see image)
    Good luck Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pressure loss after faucet replacement in kitchen [ 11 Answers ]

We replaced the Kitchen faucet because the old one had a water leakage. Since we change to the new faucet the Water pressure has dropped dramatically. We checked both the hot and cold water valves they were fully open. Any ideas.

Turning off water for faucet replacement [ 4 Answers ]

My husband attempted the rather easy job of replacing a kitchen faucet. After turning off water supply, water continues to dribble out of faucet.. He says there some problem in turn off valve. How does he replace valve if water is running out of the faucet? We DO have a well for water supply.

Low hot water pressure from kichen faucet only- 1 handle faucet [ 7 Answers ]

Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the...

Faucet Replacement [ 7 Answers ]

My bathtub has a two handle hot/cold with a diverter for the shower/tub faucet. Water was coming out of the handles so I bought a kit to replace it. I couldn't tell what type of faucet that I currently had so I bought the kit that closely resembled the handles. After installing the kit, I...

Tub Replacement [ 10 Answers ]

Attached picture. I have gutted the bathroom and am installing an enameled steel tub on a slab(the original was cast iron). I test fitted the tub and drain assembly. The tub fits fine but the waste shoe for the drain hole is about an inch too low (the new tub bottom is higher than the old...

View more questions Search