Nice and easy really, just download and run
Adaware and
Spybot and this will remove this problem.
This kind of thing is dealt with in a lot of other threads in this forum.
Hope this helps
Next...
Instructions for use:
Download and run SpyBot
Install the program and launch it.
Go to Start > Programs >Spybot > Search & Destroy and choose Spybot S&D
Close ALL windows except Spybot S&D
Click the button to "Search for Updates" and download and install the Updates.
Next click the button "Check for Problems"
When Spybot is complete, it will be showing "RED" entries "BLACK" entries and "GREEN" (GREEN) entries in the window
Put a check mark beside the RED entries ONLY.
Choose "Fix Selected Problems" and allow Spybot to fix the RED entries.
Reboot...
Next...
Download and run AD-Aware
Install the program and launch it.
1. Launch Ad-Aware SE and run the WebUpdate feature. (Click on the Globe icon > Click connect > Click OK > Click Finish.)
2. Set up the Configurations as follows:
-- Click the Gear wheel at the top of the Ad-Aware window
-- Click General > Safety & Settings: Check (Green) all three.
-- Click Tweak > Cleaning Engine > UNcheck "Always try to unload modules before deletion".
3. Click "Proceed"
4. Click "Scan Now"
5. Deselect "Search for negligible risk entries" as negligible risk entries (MRU's) are not considered to be a threat.
6. Select "Search for low-risk threats"
7. Run the scanner using the Full Scan (Perform full system scan) mode.
8. When the scan has completed, select Next.
9. In the Scanning Results window, select the "Scan Summary" tab.
10. Check the box next to each "target family" you wish to remove.
11. Click next > Click OK.
Reboot...
Also to really cover yourself run
Trend Housecall on FULL settings to make sure you are clean.