Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Basement Bathroom Rough-in
[ 9 Answers ]
My house (approx 15 yrs old) has a basement bathroom rough-in. It has 3 pipes protruding, one is 4" in diameter, one is 1 3/4" (inside dia.) & the other is 2" in diameter. Assuming, one (4") is for the toilet, one (1 3/4") is for the shower vent and the other (2") is for the shower drain. The...
Basement Bathroom Rough-in
[ 1 Answers ]
Hi! I have a 2 piece rough-in for my basement, but I also want to put in a bathtub. The rough-in includes a 3" abs stub out for the toilet and a 1 1/2" stub out drain that is vented. I'm going to have to break into the concrete... where is the best place to drain into (p trap then into the 3",...
Yet another basement bathroom rough in
[ 7 Answers ]
I apologize in advance for the broken record, but I'm thinking of roughing in a bathroom in my basement myself. I intended on hiring a plumber until I got the first quote :eek: I have a full bathroom roughed in, with a 12"x12" box with a 2" drain for the shower/tub on the far left. In the...
Basement Bathroom Rough-In
[ 7 Answers ]
Good afternoon. I am overhauling my basement and I have removed a 10' x 10' section of slab in order to rough in the drainage for a new bathroom. see layout: http://www.korteco.com/ben/floorplan.jpg My first question is what size pipe (using PVC) should I use for my shower drain. I am...
Basement bathroom rough ins
[ 3 Answers ]
I'm in the process of developing my basement. There is no rough-in for bathrooms. I'm putting an ensuite attached to a room with a shower, vanity and toilet. Backing on to this bathroom is another 1/2 bathroom with toilet and sink. There was no future vent put in when the house was built making... View more questions Search
|