Ask Experts Questions for FREE Help !
Ask
    msoukal's Avatar
    msoukal Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Dec 15, 2007, 01:03 PM
    Sears Kenmore tumbles, but no heat
    I have a Sears Kenmore dryer tumbles but no heat I replaced the Hi limit theremo and check the heating element. I am getting a ohm reading on the heating element but it does not heat up. Any help would be appreciated.

    Thanks MS
    rhbell's Avatar
    rhbell Posts: 47, Reputation: -1
    Junior Member
    		  
    #2

    Dec 16, 2007, 01:43 PM
    Make sure your lint traps are clean
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #3

    Dec 16, 2007, 01:53 PM
    If the element is good, are you getting 220 volts to it?
    msoukal's Avatar
    msoukal Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Dec 16, 2007, 02:03 PM
    Quote Originally Posted by esquire1
    If the element is good, are you getting 220 volts to it?
    The lint trap is clean, and yes I am getting 220 volts to the heating element
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #5

    Dec 16, 2007, 02:18 PM
    Did you remove one lead to the element when you checked it? If not you could be getting a false reading. I would remove the element and visually check it
    msoukal's Avatar
    msoukal Posts: 3, Reputation: 1
    New Member
    		  
    #6

    Dec 16, 2007, 09:02 PM
    Removed it and took it to an appliance parts center they are the one that check it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sears/Kenmore Dryer 417.84152500 no heat [ 5 Answers ]

I have been working at this thing for about 4 days now and am getting very frustrated. I can get the dryer to run but there is no heat. I tested myself then removed and took the electronic fuses/limiter/high temp cutoff etc to the local appliance shop to verify my tests and they all came back...

Sears kenmore gas dryer 90 series [ 3 Answers ]

It's not heating up. It tumbles. I already checked the vent and air is flowing. Also, ckecked the thermal-fuse and thermostat and their continuity is Zero. Also, the igniter looks in one piece. And turned the breaker on and off. What could the problem be?

Sears Kenmore 60 series dryer model # 96560200 [ 1 Answers ]

We have a kenmore dryer, model # listed in title. Suddenly it won't start. When you push the start button it sounds like it will start but doesn't. Thanks

Sears kenmore washer will not agitate or spin [ 1 Answers ]

My sears kenmore washer moder 110.24422300 drains but will not agitate or spin I hear a noise while in that mode please help me

View more questions Search