Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling fan works, only 1 of 3 lights work
[ 6 Answers ]
I just installed the Harbor Breeze Vector Elite, which is a pullchain fan. I installed a Harbor Breeze remote to it as well. The fan controls work fine, but only one of the lights is working. It will dim and everything, but the other 2 won't come on. What up?
Can't get remote ceiling fan to work
[ 3 Answers ]
I bought a Hampton Bay remote control ceiling fan with light a couple of months ago. We were replacing a fan that had been controlled by a dial on the wall. The first two receivers burnt out and I called in an electrician to tell me why - apparently the dial on the wall had been messing with the...
Lights do not work on the ceiling fan
[ 3 Answers ]
The fan will come on when using the fan switch, but when I use the light switch the lights will not come on. Is this a wiring problem or a switch problem? I would like to fix it myself if possible. The ceiling fan was put in with lights attached below in 1995 and the lights quit working about 2...
Ceiling fan w/lights & remote control
[ 1 Answers ]
I am building a sun room that will have a ceiling fan with lights. I want to turn the lights on and off from 3 different locations (4-way switching). I also want to control the lights from a remote control. Does anyone offer a remote that will control the fan speeds, light dimming and also...
Ceiling fan does not work w/ remote
[ 1 Answers ]
I am trying to install a variable speed fan(reversible motor) w/ remote, which also has 2 light fixtures. The receiver has two inputs, a black(hot) and a white(neutral), and 4 outputs. One neutral, one black(for the fan), one each for the 2 light fixtures. The problem is when I connect the fan... View more questions Search
|