Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
10HP Briggs and Stratton Generator Engine
[ 24 Answers ]
Hi Guys, Recently, I was using my Generac 5550 generator with a 10HP Briggs & Stratton OHV, model 204412, Type 0142 engine, and it started running rough and puffing black smoke. So I bought the repair manual. Took everything apart to the piston, cleaned the carbon off the pistons and...
I can't pull the starter cord on my 10hp Briggs and Stratton Engine
[ 6 Answers ]
I recently purchased a two year old 10 hp Troy Built wood chipper. I've used it for about 4-5 hours and recently had to add a little oil. I added the correct type as per the manufacturers instructions. It started up just fine and after 15 minutes or so I shut it off to empty the bag. Once the...
10hp motor, unknown brand no spark!
[ 4 Answers ]
I have a 10hp motor. It has no spark. I tried testing the coil, but I think I did it wroung. What could be the problem?
10hp Sears riding mower won't idle
[ 3 Answers ]
I bought a used Craftsman (Sears) 10hp riding mower (model 502 255050) and it only runs at high throttle settings and backfires a bit. Everything else works and it does go at this throttle setting, but not comfortably. Clutch tricky to let out at this speed. (lifts front wheels) I think the gas...
Old snowblower
[ 1 Answers ]
I have an old Toro 826 used snowblower that was given to me. I cannot start it. I bought a new spark plug, filled the gas tank, even put a little bit of gas where the spark plug goes. I still can not start it. Can someone please help me? View more questions Search
|