Ask Experts Questions for FREE Help !
Ask
    goelpunit's Avatar
    goelpunit Posts: 20, Reputation: 2
    New Member
    		  
    #1

    Dec 4, 2007, 03:36 AM
    How we desgin a coal based thermal power plant ?
    Dear All,

    I want to know about the software used for desgining Coal Based Thermal Power Plant. If anybody knows about this type of software tell me. My some important queries are as follows.

    1) How do we select the Boiler Auxiliaries?
    2) How do we select the Steam Turbine Auxiliaries?
    3) How do we select the Generator Auxiliaries?
    4) How do we calculate apparutus used in Coal Handling system?
    5) How do we calculate apparutus used in Ash Handling system?
    6) How do we calculate apparutus used in Raw Water Intake System?
    7) How do we calculate apparutus used in Fuel Handling System?
    8) How do we calculate apparutus used in DM Water Plant System?
    9) How do we calculate apparutus used in Lime Handling System?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Dec 4, 2007, 12:18 PM
    Software?

    What ever happenend to experience and standard engineering practices?
    goelpunit's Avatar
    goelpunit Posts: 20, Reputation: 2
    New Member
    		  
    #3

    Dec 4, 2007, 11:33 PM
    Dear Mr. Tkrussell,

    Can you suggest me any book or website which I refer to solve these problems? I have no more experience in this field. Presently, I have joined a company of similar field. I am very thankful to you if you shared your experience with me for desgining a caol based power plant or vise - versa. Also, I am searching main equipment & calculations used in Sub-Station desgining up to 132KV.

    With Thanks & Regards..
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #4

    Dec 6, 2007, 03:57 AM
    Here is something to get you started:
    http://www.ef.org/documents/CoalFire...Production.pdf

    Do a websearch for coal fired power plants design.

    You have a great deal of work ahead of you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Does anyone know Clayton wood/coal stoves [ 6 Answers ]

The house that I have been in for the past 12 years has a Clayton wood/coal stove in the basement. The tag on the back says; Jones Metal Products, Mankato, Minnesota. Model 7.1V and 5.6V and was tested in 1983. Does anyone know if there is a way to get an operating manual and if you can still...

Thermal Out? [ 4 Answers ]

Anyone know what this means? Also can you explain it in the simpliest form possible :D :rolleyes: Thank You

Painting Cabinets - Oil based or Water based? [ 1 Answers ]

Going to be painting my oak kitchen cabinets white. I heard that oil based paint would be best, but don't want to deal with the extra mess. Is there anything wrong with using a good acrylic enamel?

Difference between a Power Distribution Unit (PDU) and a Remote Power Panel (RPP) [ 1 Answers ]

Is there any difference between a Power Distribution Unit (PDU) and a Remote Power Panel (RPP) in context of data center? If yes, then what is it?. Thanks.

Compressor Thermal Power [ 3 Answers ]

Hi, Is there any method to know the thermal output of a compressor if I know the type of refrigerant and amount that is used? I only know the voltage and running current and amount and type of refrigerant. Thank you all.

View more questions Search