Ask Experts Questions for FREE Help !
Ask
    Hellinga's Avatar
    Hellinga Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 3, 2007, 02:12 PM
    Programming electrical timer
    I bought an electrical timer at Canadian Tire 3 years ago and cannot find my instruction booklet.
    It is a Garrison timer Model RCT 100
    On its face it has digital clock
    On of button; CD button; random button; reset button
    set button; two arrowed program buttons.

    I figured out how to set the time, but I cannot program it. Could you help me out please.
    Styn
    runner_122's Avatar
    runner_122 Posts: 9, Reputation: 1
    New Member
     
    #2

    Dec 15, 2007, 12:54 PM
    hi hellinga, to set your program on/off. Have your present time set first,
    then press "right" arrow under program,
    now "set". Days will flash by pressing either arrow day/days will change if you want to set for every day same time, all days should be flashing
    then press "set" now choose your hour for "on" military time.
    now "set" again to choose your minutes.
    now "set"
    right arrow now "off" choose time then "set" same procedure as "on"
    now that is program #1.
    if you want to choose other times for off & on continue with other programs up to 20.
    if you want it for your x-mas lights one program will do it.
    after program one(1) is set use left arrow to return to "time" 2 pushes should bring you back to time now your all set. Good luck
    mrnsie's Avatar
    mrnsie Posts: 1, Reputation: 1
    New Member
     
    #3

    Jan 8, 2008, 09:38 AM
    I have the same one, I got it programmed but it shuts off randomly. I Have it set to have the lights on for 2 hours, but it will shut them off within 30 secs after they come on. They get shut off sometimes in less then 5 secs? Would this be due to some interference?
    hkestenberg's Avatar
    hkestenberg Posts: 3, Reputation: 1
    New Member
     
    #4

    Jan 23, 2009, 01:08 PM
    I have forgotten how to change my Garrison RT100 timer from 24 hour to 12 hour clock
    hkestenberg's Avatar
    hkestenberg Posts: 3, Reputation: 1
    New Member
     
    #5

    Jan 23, 2009, 01:09 PM

    I have forgotten how to change my Garrison RT100 timer from 24 hour to 12 hour clock
    cleogir's Avatar
    cleogir Posts: 1, Reputation: 1
    New Member
     
    #6

    Feb 14, 2009, 11:02 PM
    To toogle between 12/24 hours format, press RANDOM during clock setting.

    Good luck.

    cleogir
    greywolf123's Avatar
    greywolf123 Posts: 1, Reputation: 2
    New Member
     
    #7

    Apr 18, 2009, 09:23 AM

    Manual in English & French:

    http://210.0.139.10/eCatalogUserManu...9162254332.pdf
    eagerold's Avatar
    eagerold Posts: 3, Reputation: 1
    New Member
     
    #8

    Jun 8, 2013, 07:21 PM
    Hi greywolf123;
    The Manual site does not seem to exist.
    By any chance could you give it again ?
    JG
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
     
    #9

    Jun 9, 2013, 05:00 AM
    Greywolf has been gone since 2009, why not post your question fresh?
    Have you done a good internet search yet? Have you considered that a new one
    With instructions may be far more convenient than an exhaustive search?
    eagerold's Avatar
    eagerold Posts: 3, Reputation: 1
    New Member
     
    #10

    Jun 9, 2013, 06:48 AM
    hfcarson: many thanks for the info/direction

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

C programming [ 2 Answers ]

I'll be extremely thankful if u could provide me with a c program that convert a given nfa to dfa

Programming Noma Block Heater Timer [ 3 Answers ]

I have a Noma Automatic Daily Setting Block Heater timer that I have lost the instructions to. I need to program it to come on and warm up the block heater of my car tonight and cannot remember how to do it! Can anyone out there help me?

Programming a Noma Timer [ 1 Answers ]

I have a noma multi purpose timer that I'm trying to program for my Christmas lights. It has a time button and a mode button with a small display window to see the time. How do I do this? Opps! Never mind, I found the answer and don't know how to delete the question. THanks smart organized person...

Pool Timer & pump electrical connection [ 5 Answers ]

If one hooks up a pool pump to an intermatic timer incorrectly, can it blow the pump? I didn't hear anything. Is there a way to tell if the pump is bl;wn or just hooked up wrong? Thanks.

Timer Client/Caf [ 4 Answers ]

Greetings fine folk, 1) First time posting so if I mess up or this is the wrong forum please have mercy :) 2) I work for a medium public library and we are looking for a timer client/café timer for the 12 PCs we have available for library patron use. These 12 PCs are connected to the Internet...


View more questions Search