Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bathroom sink drain trap
[ 1 Answers ]
I've installed a new bathroom vanity. The drain line, which comes through the floor, not the wall, is in the exact center of the vanity; the drain from the sink is likewise centered. How do I install a trap given the two pipe are centered exactly above one another and are not offset? Do I even...
Offsetting a shower drain trap?
[ 5 Answers ]
A friend is having a shower installed in a second floor bathroom, directly over a stairway landing. The floor joists are only 4" deep, such that a trap under the shower would protrude into the head space in the stairwell. The plumber gave two options: raise the shower floor four inches, such...
1930s basement floor drain w/out trap?
[ 5 Answers ]
Have any of you ever seen a floor drain that doesn't have a trap in it? In our house half the basement is finished and the other half unfinished, both have floor drains in lowest part of the room. The one in the unfinished part always worked, albeit slowly, but recently stopped and when snaked...
Do washer drain pipes need a sewer trap?
[ 1 Answers ]
My hubby has moved our washer and dryer and it works - mostly. We have some soapy foam coming out of the top of the drain pipe. He raised the pipe and we have less, but still some soapy foam. I wish I had checked your forum earlier as I've learned that washers drain with a lot of pressure. ...
Tub drain to P trap
[ 2 Answers ]
Hey, I am replacing the tub in my bathroom, as well as much of the drain line. I am replacing the galvanized(?) pipe and drum trap with 2" PVC, a Vent, and a P-Trap.. my problem is how do i install the Tub drain to the P-trap. The tub drain assembly is 1 1/2" or so.. and the P-Trap is 2".. I got a... View more questions Search
|