Ask Experts Questions for FREE Help !
Ask
    mclee1's Avatar
    mclee1 Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 28, 2007, 04:47 PM
    Concord 90% Gas Furnace not working
    Hi,

    I have a Concord 90 upflow gas furnace that is about 5 years old. It just decided over the weekend to stop working (after a couple of weeks of being turned on), right in the coldest of winter (-20 to -25C).

    The cycle goes well just until the flames come on. Thereafter, it lasts only for few seconds before a clicking sound comes on, leading to the system turning off itself. It tries for 3 more times after that, then it locks out. The light indicator blinks on a 6+6 code series. Unfortunately, there is no explanation for 6+6 code, not on the furnace instruction site, not on the internet...

    Similar episode happened last year, but I managed to get it back on functioning after cleaning the air filter and the flame sensor. This same trick is not the solution this year...

    Would any expert be able to guide me as to what could be wrong here? I called many heating contractors in the area (Edmonton, AB, Canada) and nobody seems to be familiar with this carrier around here. Supplying parts is also going to be a bit of a problem, short of me ordering online from the US. I am certainly in BIG troubles now! :eek:

    Thanks for you help.
    Regards,
    MC
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Nov 28, 2007, 10:49 PM
    If it were that cold in y area I would get it going ASAP. Call a serviceman. Most furnaces work oin the same principle and once the problem is found it is possible another part from a different brand will work in fixing it. If no at least you know which part to order. If that furnace is not available in that region how did it get there?
    marksimon112's Avatar
    marksimon112 Posts: 5, Reputation: 1
    New Member
     
    #3

    Nov 20, 2013, 11:38 PM
    The Conventional Gas Furnace
    The gas furnace is an appliance looking like a large box that does the following:

    • takes in cold air,
    • cleans it with an air filter,
    • heats it up with a gas burner using a steel heat exchanger,
    • distributes the warm air with a blower motor through your home's ductwork


    The heated air then cools down in your home's various rooms and returns to the furnace through return air grills and ductwork.
    The cold returning air enters back through the air filter into the furnace to complete another heating loop.

    Sometimes there is a humidifier mounted on the furnace or the return air ductwork.

    Furnaces come in different efficiencies measured in AFUE.

    Mark Simon
    Help Me Find a Furnace Cleaning Services, Duct Cleaner in Edmonton Area. Residential and Commercial - Advanced Carpet Cleaning in Edmonton. Dryer Vents, Dirty Ducts Solutions | MightyCleanDucts.ca
    [email protected]

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Concord Gas Furnace [ 2 Answers ]

I have a Concord Gas Furnace Model CG90UB... it currently is wired to run the fan on low speed which I find is not adequate to move the air around the house... I would like to know how to change the fan speed to run on medium... the manual states there are four speeds... Low, Low Medium, Medium and...

Concord 80 plus furnace [ 2 Answers ]

I have a concord 80 plus that is mounted horizontally. The pilot light turns on, the gas ignites, but will only stay lit for a few seconds. It will try this three or four times before the blower shuts off. The thermostat works fine (atleast it did for ac). Any suggestions?

Concord 80 plus furnace [ 2 Answers ]

I am wondering how many BTu this furnace is? I can not find it anywhere. Thanks!

Furnace filter for a Concord 80 plus furnace [ 2 Answers ]

I just moved into a beautiful home. I am currently a renter. There is a new concord 80 plus furnace installed. I know it needs a filter but I'm not for sure as to where it goes?

Concord furnace? [ 1 Answers ]

I have a concord furnace model # rgu90a100d14-3a and was wondering what the cfm for this unit is?


View more questions Search