 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Maths related to CADCAM machining geometry
I am machining sectors ( 120 deg) using CADCAM on a Machining Centre. The thickness is 18mm the OD is 1000mm the ID is 750mm. The tool is 12mm diameter. The most efficient (on screen) method of utilising nesting and minimum tool operations is to make a snake of three sectors - spaced by the tool width.
The tool path sees the snake (3 sectors) as one continuous perimeter and then does two separate cuts to split the three. The question is…. If the tool wear is 1mm - how does this affect the diameter and what is the relationship % wise 1mm - (on three splits ) to 1000mm diameter. I can send jpg or CAD drawings to explain visually Hope you can help Ben |
||||
|
||||
|
Please can you send to me cad drawing?in the e-mail
[email protected] |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
suppose a fish swimming distance L ft at a speed v ft/sec relative to the water and against a current flowing at the rate of u ft/sec (u<v) expends a total energy given by E(v) = aLv^3/v-u where E is measured in foot-pounds (ft-lb) and a is constant 1) evaluate lim/v-u^+ E(v) and...
Hi, I have problem with this question. Hope you can find a solution for this question. Philip, the proprietor of a vineyard, estimates at the first 10000 bottles of wine produce this season will fetch a profit of $5 per bottle. However, the profit from each bottle beyond 10000 drop by $0.0002...
The Brightvale Institute of Technology needed new Maths books, so they ordered a new set from Brightvale Books. When they got the books back from the printers, however, they discovered that there had been a horrible mistake. Apparently the printer scrambled up all the digits in the printing...
i'm a b.tech biotechnology student who wants to appear for gre.i'm really poor at maths since i'm a bi.pc student.i really can't concentrate on maths due to my poorgrades in it in school days. Now there's gre ahead.how should i prepare for it? Is it really tough? i'm really good at other...
Need some help with vectors and functions or any website with these information relating to vectors and functions. VECTORS -addition, subtraction, and multiplication of vectors by a scalar -displacement and position vectors -magnitude of a vector -equal. Parallel and perpendicular vectors ...
View more questions Search
|
