|
|
|
|
New Member
|
|
Nov 15, 2007, 10:49 AM
|
|
Ip pings OK but computer names not recognised
Problem: cannot communicate properly between computers
Both pc's using XP prof OS
Two computers routing through a belkin 55g wireless router; router connects to a broadband service.
Workstation 530 connects direct to router via CAT5 cable - laptop connects to router via wireless connection.
I can ping successfully:
All 3 from w/s 530 using ip addresses i.e. router, w/s & laptop
All 3 from laptop using ip addresses i.e. router,w/s & laptop
w/s 530 using it's own computer name
Laptop using it's own computer name
I cannot ping :
From w/s 530 to laptop using computer name and vici versa
Message "ping request could not find host ......"
How can I create a network link to share data?
Appreciate any ideas & help.
|
|
|
BossMan
|
|
Nov 15, 2007, 11:55 AM
|
|
Just map a network drive using IP's in the form \\x.x.x.x\shared folder
|
|
|
Computer Expert and Renaissance Man
|
|
Nov 15, 2007, 11:57 AM
|
|
Are they all in the same workgroup?
|
|
|
New Member
|
|
Nov 19, 2007, 03:49 AM
|
|
Originally Posted by Curlyben
Just map a network drive using IP's in the form \\x.x.x.x\shared folder
Tried this and got, "The network location cannot be reached. For info about ......."
Any thoughts?
Thanks
|
|
|
New Member
|
|
Nov 19, 2007, 03:50 AM
|
|
Originally Posted by ScottGem
Are they all in the same workgroup?
Yes
|
|
|
Junior Member
|
|
Nov 20, 2007, 05:01 AM
|
|
Are all in the same workgroup and defferent names did you assign Ip for all of them or they use static Ip address
|
|
|
New Member
|
|
Nov 20, 2007, 11:31 AM
|
|
Originally Posted by adec234
are all in the same workgroup and defferent names did you assign Ip for all of them or they use static Ip address
Yes both laptop and workstation are in the same workgroup and have different names.
IP addresses are set on each machine to be picked up from the router - "Obtain an ip address automatically" + "Obtain DNS server address automatically". e.g. router... 1, w/s... 2, laptop... 3.
Router is a belkin54G wireless router.
Thanks
|
|
|
Full Member
|
|
Nov 20, 2007, 11:54 AM
|
|
On your laptop that is connecting wirelessly, ensure that you have both settings under TCP/IP properties:
1. Client for Microsoft Networks
2. File and Printer sharing for Microsoft Networks
|
|
|
New Member
|
|
Nov 21, 2007, 01:56 AM
|
|
Originally Posted by DaBaAd
On your laptop that is connecting wirelessly, ensure that you have both settings under TCP/IP properties:
1. Client for Microsoft Networks
2. File and Printer sharing for Microsoft Networks
Thank you DaBaAd
I have tried this suggestion but it does not produce the link.
My laptop does have internal wireless capability but I am using a card I purchased along with my belkin54g router. Could tHis complicate things? I can connect OK to the internet via the router.
|
|
|
Full Member
|
|
Nov 21, 2007, 07:37 AM
|
|
Originally Posted by BobbyD3
Thank you DaBaAd
i have tried this suggestion but it does not produce the link.
My laptop does have internal wireless capability but i am using a card I purchased along with my belkin54g router. could tHis complicate things? I can connect ok to the internet via the router.
If you're laptop came with a built in wireless, remove the PCMCIA wireless card that came with your router and try that. This may be interfering. Just ensure that you can find the router in your available wireless networks and that you have that laptop in the same workgroup.
|
|
|
Junior Member
|
|
Nov 28, 2007, 01:45 PM
|
|
Originally Posted by BobbyD3
problem: cannot communicate properly between computers
both pc's using XP prof OS
two computers routing through a belkin 55g wireless router; router connects to a broadband service.
workstation 530 connects direct to router via CAT5 cable - laptop connects to router via wireless connection.
I can ping successfully:
all 3 from w/s 530 using ip addresses i.e. router, w/s & laptop
all 3 from laptop using ip addresses i.e. router,w/s & laptop
w/s 530 using it's own computer name
laptop using it's own computer name
I cannot ping :
from w/s 530 to laptop using computer name and vici versa
message "ping request could not find host ......"
How can I create a network link to share data?
Appreciate any ideas & help.
Are they in desame work group name? If is is cheek your try to ping the wireless w/s on wired w/s and try ot again on wireless. If both end ping in each other go to any folder you want to share and do it but if it did not ping yopu have propblem with your network.
|
|
|
Uber Member
|
|
Nov 28, 2007, 02:09 PM
|
|
Are firewall rules preventing this?
|
|
|
New Member
|
|
Nov 29, 2007, 04:44 AM
|
|
Originally Posted by BobbyD3
problem: cannot communicate properly between computers
both pc's using XP prof OS
two computers routing through a belkin 55g wireless router; router connects to a broadband service.
workstation 530 connects direct to router via CAT5 cable - laptop connects to router via wireless connection.
I can ping successfully:
all 3 from w/s 530 using ip addresses i.e. router, w/s & laptop
all 3 from laptop using ip addresses i.e. router,w/s & laptop
w/s 530 using it's own computer name
laptop using it's own computer name
I cannot ping :
from w/s 530 to laptop using computer name and vici versa
message "ping request could not find host ......"
How can I create a network link to share data?
Appreciate any ideas & help.
Try adding the IP address & Hostname of the machines in host file. You can find it in system32/drivers/etc/hosts.
|
|
|
New Member
|
|
Nov 29, 2007, 07:40 AM
|
|
Am I understanding this correctly:
You are able to ping from the workstation to the laptop using IP address?
You ARE NOT able to ping from the workstation to the laptop using the laptop name?
|
|
|
Full Member
|
|
Nov 29, 2007, 02:40 PM
|
|
Is the router your DHCP server as well or are you using fixed IP's?
If DHCP: try doing ipconfig /release <enter> then ipconfig /renew from a dos prompt.
What are you using for WINS? When you type ping <computername> the resolution is done with WINS by default so you would have to have something setup for that. If you don't have a server to do that you will need to use the lmhosts file as another user already suggested. Lmhosts lookup is enabled by default as well but you will have to manually add the computer names to that file on each computer... if you change the computer name you'll have to update the lmhosts files.
|
|
|
Uber Member
|
|
Nov 29, 2007, 06:54 PM
|
|
Not exactly true. Check the WINS advanced tab of the Network adapter to see if NETBIOS over TCP/IP is enabled. The defaut tab should work.
Note that with this method, it may take over 45 minutes for a computer name to be recognized. It's in the Microsoft Knowledge Base. Also when computers leave a network, they may still show up. What do you expect from MicroSoft? Only with WINS or lmhosts can a computer name be rcognized immediately and recognized across subnets.
|
|
|
Senior Member
|
|
Nov 29, 2007, 08:29 PM
|
|
Originally Posted by KeepItSimpleStupid
Are firewall rules preventing this?
I was thinking the same thing... blocked netbios, which would explain why the OP is also unable to use file shares.
Make sure port 137, 138, and 139 are open in the firewall, if you have one.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Being recognised by people
[ 1 Answers ]
Hi I need help I really want to be a singer or pianist sometime in my life. I'm only turning 13 and I'm doing my grade 5. Is there anything I can do at my age that would help me get noticed?? :confused: please reply!!
Hardrive not being recognised
[ 2 Answers ]
I have a hardrive that worked on all the computers in my house and I used it on the computer downstairs moved some files then took it upstairs to watch a film and the computer didn't recognise it well it came up with a little bubble saying windows does not recognise this usb device one or more of...
View more questions
Search
|