Ask Experts Questions for FREE Help !
Ask
    Dakota_Rod's Avatar
    Dakota_Rod Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 4, 2007, 06:48 PM
    Filter reset button for Honeywell Chronotherm IV plus
    I just changed the filter in my furnace, how do I reset my thermostat to make the word "filter" stop blinking. I called the service dept. and they told me to find my users manual! I can't find it. HELP!

    Thanks

    Dakota
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 5, 2007, 05:21 PM
    Give me the model number of the thermostat.I will try and find the manual.
    Dakota_Rod's Avatar
    Dakota_Rod Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 7, 2007, 12:06 PM
    Honeywell Chronotherm IV is the model of the Thermostat.

    Thanks Dakota
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Nov 7, 2007, 12:48 PM
    The real model number should start with a TXXX-XXX
    The number you are giving is just a general number and of no value to be accurate for a diagram. When you find the real number just go here and you can look it up for yourself.

    Lower right hand box. Put in your actual model number

    Default - Honeywell Environmental And Combustion Controls
    nklapper's Avatar
    nklapper Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Feb 8, 2008, 07:04 PM
    I Want To Program The Thermostat To Keep The Fan On So That We Can Keep The Humidifier Operational. Can This Be Done With The Honeywell Chronotherm I've Plus
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #6

    Feb 8, 2008, 07:46 PM
    Yes and more. Here is a link. Put in your correct model number and the instructions for your Honeywell thermostat will be there


    Default - Honeywell Environmental And Combustion Controls
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Filter reset button for Honeywell Chronotherm IV plus [ 13 Answers ]

I just changed the filter in my furnace, how do I reset my thermostat to make the word "filter" stop blinking. I called the service dept. and they told me to find my users manual! I can't find it. HELP!

Honeywell Chronotherm IV plus? [ 1 Answers ]

How do I reset the filter reset button for Honeywell Chronotherm IV plus?

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

Reset button keeps needing to be reset [ 2 Answers ]

The reset button on our oil furnace needs to be reset every 10 to 14 days. What can be the problem? We are leaving for the holidays and I'm concerned that we could come home to frozen pipes.

Wiring a Honeywell Chronotherm IV [ 3 Answers ]

What size wiring do you use for a thermostat? I need to move one from an exterior wall to an interior one. Also, any tips on fishing wires through insulation? Bringing it up the wall and over suspended ceiling and down another wall.

View more questions Search