Ask Experts Questions for FREE Help !
Ask
    KDee01's Avatar
    KDee01 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 1, 2007, 09:46 AM
    Gas Release Vent
    I am removing a small wall that divides my bathroom into two sections. When I started to take down the dividing wall (I knew it couldn't be that easy) I found the vent pipe for the toilet. Can this be moved and if so does it hurt the ventilation if you use an elbow?
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
    		  
    #2

    Nov 6, 2007, 08:43 PM
    It can be moved. Don't go too far horizontally though. It creates a possible clog from backwash on the toilet
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas water heater pressure release valve leaking water [ 14 Answers ]

Hello all, I have a slight issue with my gas water heater. It's a AO Smith 32.75 gallon type. All of a sudden, water is coming out of the relief valve pipe. I have placed a coffee can there, and I have to empty it out every few hours now. Im not sure where to turn for this one, as I have...

How to test gas hot water heater pressure release valve? [ 7 Answers ]

The pressure release valve on the State Select Gas Hot water heater (40 or 50 gallon) is allowing water from the hot water tank to drip through the copper overflow pipe drain on the side of the house. There is no leak or drip around the valve or tank itself. The safety notice on the hot water...

Release to another state from Iowa work release [ 5 Answers ]

My dad put in a transfer to Florida as he is in Iowa work release about a month ago, how long should it take? I can't wait to see him... They said Des Moines already approved it... Please help Sheena:confused:

Gas cap release [ 3 Answers ]

The gas cap release lever on my 2003 Honda Accord has stopped working. Periodically it will not release but does eventually release. This time it will not release and I am about out of gas! Does anyone know what is wrong or how to get the latch to release?

View more questions Search