Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Intertherm forced air furnace
[ 1 Answers ]
My furnace has not been working right since I replaced the oil filter and nozzle. I have adjusted the igniters properly and cleaned them up and polished them but when it ignites it rumbles and when I take it apart there is oil on the nozzle and igniters. I have cleaned this several times and was...
Furnace. Forced Hot Air System
[ 1 Answers ]
My furnace is making a scratchy noise, almost like there is a metallic wire scratching the inside of the furnace. It is not a rattling sound and this is not its normal noise. It seems to be making it even when the heating or the domestic hot water systems are not calling for hot water. In other...
Amana Forced Air Furnace
[ 2 Answers ]
My two year old furnace does not come on when the thermostat indicates that it should: i.e. 2 degrees below the ambient room temperature. I have set it for 72 degrees but it gets as low as 64 degrees before it will finally come on. I have replaced the thermostat with a brand new honeywell...
Forced air furnace
[ 1 Answers ]
;) Gas forced air heating, I like to know if there is a way to change the temperature difference between stop and start, for example instead of 68-start and 73 stop change too 70 start and 73 stop , View more questions Search
|