Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton bay ceiling fan lights & fan not operating
[ 17 Answers ]
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
Hampton Bay Ceiling Fan Remote Receiver
[ 12 Answers ]
Have a Northport III 52" ceiling fan and can't figure out where to place the remote receiver. The installation manual says to place it in the upper canopy, but there's not enough room and after installing I can't secure the canopy. Any ideas on what I'm doing wrong?:confused:
Hampton Bay Ceiling fan not working with Receiver/Remote
[ 5 Answers ]
Hi, I bought a Hampton Bay Ceiling fan with a remote. I was able to put up the fan and it works along with the lights. When I tried installing the receiver on the fan, the fan will not work, with the remote, nor manually, as almost like no power is going to it... As soon as I remove the...
Hampton Bay Redingtom IV Ceiling fan remote receiver
[ 1 Answers ]
The yellow covered remote control receiver in the fan box is simply too big to fit in the decorative mounting bracket cover. The directions mention a receiver mounting bracket, that was not there, and wouldn't have fit inside either. Anyone had to deal with this yet? Instructions attached. Jim
Hampton Bay Ceiling fan: fan speed pull chain
[ 2 Answers ]
The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it? View more questions Search
|