Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Red Wire in ceiling junction box
[ 3 Answers ]
I am trying to install a chandlier in an existing ceiling junction box, however, the previous home owner did not have a light fixture attached. There are four wires coming out of the box, white, red, black and red. This junction box is connected to a wall switch with a dimmer. What do I connect...
Another Junction Box ?
[ 9 Answers ]
Again, thanks to everyone for all their valuable information as I wire up my Recording Studio addition. :) You guys are great! ;) I have another question reference the use of Junction boxes. On a couple of my framed walls, where I wired in outlets, some of the outlets (for like Exit Signs) are...
Junction box for #2 aluminum wire
[ 3 Answers ]
I need to join a new 100A feed on #2 aluminum wire to an existing #2 wire running from the panel. So this is actually #2 alum triplex in both cases plus a #8 bare copper ground. The junction will take place in an access panel in the wall where the two PVC conduits meet. What size junction box do...
Junction box as a cover?
[ 3 Answers ]
I have a junction box currently that I need to add wiring to. It has the opening and internal clamps to add two more wires but this would put the box over its legal limit of wires in the box. The box is in a location that can be gotten at without removing any part of the building. The box is...
Junction Box Fill
[ 5 Answers ]
I'm trying to find what the fill capacity on electrical junction boxes are. I found this chart The thing that is stumping me is do you count grounds or not? For example, the specific instance that has me looking is that I have a 4x4x1 1/4 box, with 4 12/2 cables in it. If you don't... View more questions Search
|