Ask Experts Questions for FREE Help !
Ask
    4721doiturself's Avatar
    4721doiturself Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 3, 2007, 11:44 AM
    Craftsman LT4000 shuts off.
    Can you explain why my Craftsman 12.5 hp model #917255581 shuts off when I engage the blades? Engine runs fine, plenty of oil, blades aren't restricted, belts appear functional, but when the blades are engaged even slightly the engine shuts off. Is there a safety switch?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Oct 3, 2007, 04:08 PM
    Sounds like the shift lever safety, or the seat safety may be defective, the seat switch you may guess is fine because it starts, not necessarily so though, the clutch/brake safety switch is what allowed you to start the engine.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace shuts off [ 2 Answers ]

My oil furnace will shut off during the day or evening. I can usually get it going again by pressing the restart button. Even then, sometimes it won't click in, sometimes it will run for half a minute and shut down. If I restart a few times with very short runs, it evventually will run for an hour...

My car shuts off [ 2 Answers ]

This has happened twice in one month. I start my car. It starts fine. I sit in Drive with my foot on the break and in less than a minute, the car shuts off. I start the car again. It starts just fine... and there are no problems after that. I will say that sometimes when I'm sitting in Drive...

Concord shuts off [ 3 Answers ]

When I turn on the heater it works for some time 5-15 until 65-67F then it shuts off. Cool air is blowing. To restart I have to swithch off and switch on the heater (it works if I switch off and switch on t-stat as well). I set 63F last nights, and it worked just fine through the night. In the...

PC Randomly Shuts Down... [ 22 Answers ]

Components: Thermaltake Shark Aluminium Full Tower Asus A8N-E nForce4 Ultra (Socket 939) PCI-Express Motherboard Corsair 2GB DDR TwinX (2x1GB) XFX GeForce 7800GT Extreme Edition 256MB GDDR3 VIVO TV-Out/Dual DVI (PCI-Express) Maxtor DiamondMax Plus 10 NCQ 300GB 6V300F0 SATA-II 16MB Cache...

Monitor shuts down [ 1 Answers ]

I need some help with my monitor.. every time I move the cpu the monitor shuts down but the drives and fans are stilll running. Im not sure if it's the vga cable I checked the pins and they seem to be fine. So if any one can help me please reply Thanks.

View more questions Search