Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Help! We're fixing a cast iron soil pipe & NEED HELP!
[ 10 Answers ]
OK - short history of our problem! - We have a 60 yr old house - crawl space - cast iron pipes... Last week we had a back up from the washer into the tub & toilet - from the tub into the toilet... We have only 1 bath so this was VERY BAD! :( - Called Roto Rooter - $270 later - and an extra trip...
Repair leaking PVC elbow in a wall.
[ 4 Answers ]
I have discovered a leaking PVC elbow between an upstairs tub and the drain to the downstairs. It is in a very difficult to get to area. Since I can't get to it to cut it out and glue another will a silicone sealant possibly stop the leak? Or is there some other kind of sealant that might work...
Nut on wall pipe is too corroded and won't come off
[ 1 Answers ]
The wall pipe under the kitchen sink has a hole. I already disconnected the end that attaches to the trap, but the side that connects to pipe in the wall is badly corroded and the nut won't come loose. I already tried banging the pliers with a hammer and WD40. I can't get it to budge at all. ...
Bathroom sink wall pipe drain pipe
[ 2 Answers ]
My house was built in early 70's.. No plastic.. I'm putting in a new sink and had to remove the wall pipe that goes into the wall.. I needed a longer one. It seem where it goes in behind the wall into the plumbing there was some type of gasket as pieces of it fell out when I removed the pipe.. I...
Broken pipe in wall
[ 1 Answers ]
:'( Trying to fix clogged drains. While unscrewing pipe fitting from wall, pipe cracked. Lots of buildup in the grooves. Trying to replace the fitting and it won't fit due to grooves not being clean. What 's the best way to clean the grooves. Been "chipping" at it for 2 days... we are out both... View more questions Search
|