Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heating element Kenmore 70 series electric dryer
[ 6 Answers ]
When I start the dryer the heating element gets hot for about 5 seconds then blows a fuse. The dryer will still cycle, but never get hot again. I replaced the fuses and no luck. When I took the plate off I can see that it is getting hot. There are 5 coils and it appears that the top 3 coils are...
Electric Furnace - heating element
[ 3 Answers ]
I am trying to convert from my broken boiler furnace to an electric furnace. I have central air and all the vents from that. Can I just buy a heating element and put it into the air handler? If I can, how do I know what size heating element to buy? The search on the internet gave 10 and 15 KW...
Heating Element Kenmore Elite Electric Dryer
[ 3 Answers ]
How do I remove the heating element from the dryer for replacement? I can get to it and there seems to be one or two screws to loosen, but I can't disconnect the electrical connections to the heating element itself.
Replace heating element in a Kenmore dryer
[ 1 Answers ]
Does anyone have picture or directions on how to replace the heating element . I am in AZ and the dryer is back home in CA, so I do not have the model , but I can get it if it is needed to answer mymquestion. Thanks in advance :rolleyes:
How to replace heating element in Kenmoore dryer
[ 1 Answers ]
Hello, The heating element on my Kenmoore 86873800 dryer. I have the part but don't know how to replace it. Anyone know how? Thank You! View more questions Search
|