Ask Experts Questions for FREE Help !
Ask
    abfantom's Avatar
    abfantom Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 3, 2005, 05:18 AM
    Electric PTO clutch removal
    Hello,

    I have a Cub Cadet 2155 tractor with 15 HP Tecumseh engine. I'm trying to
    Replace the electric PTO clutch on the front of the engine. I have removed the center bolt but I'm unable to pull the clutch off the shaft.

    What type of pully puller do I need to pull the clutch off? There are no threaded holes to screw a pulley puller onto and my three legged pulley doesn't fit around the clutch.

    Thank you,
    Bob
    thebriggsdude's Avatar
    thebriggsdude Posts: 1,096, Reputation: 53
    Ultra Member
    		  
    #2

    Oct 3, 2005, 07:46 PM
    I wouldn't think anything else would be holding it on, but have you tried prying it off ? :D not sure for it, but just make sure nothing else is holding it on.
    abfantom's Avatar
    abfantom Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 4, 2005, 04:10 AM
    thebriggsdude,

    No I haven't tried prying it off yet. I guess I could that a try!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Testing Electric PTO Clutch [ 3 Answers ]

Troy Bilt 22hp Briggs/46'Deck Electric PTO clutch will not engage. Have changed out switch on the mower console... still no good. Removed clutch, looks OK. IS THERE ANY WAY TO TEST THIS CLUTCH?? Or should I look somewhere else... worked great one day,, the next week NOTHING!

Electric Force and Electric Field? [ 1 Answers ]

Hello, Can some one explain to me briefly what's the different between electric force and electric field? I am having trouble to make them clear to myself. Thanks you so much. Jack

Craftsman 20.5hp electric clutch overdrawing? [ 2 Answers ]

Hi, My Craftsman 20.5hp 50" deck tractor just got a battery a couple months ago and it seems to have trouble keeping it charged. I noticed that the Amp meter shows charging when the deck is disengaged but when the clutch is engaged it is discharging handily. Is an overdrawing clutch a known or...

Clutch Fan removal on 1999 Astro VAn [ 1 Answers ]

Can anybody tell me if you turn the big nut clockwise or counter clockwise to remove the fan and clutch assembly from the water pump pulley shaft. Also any hits or tips on how to break this nut loose would be helpful.It is on there really tight and was wondering if it is a left hand thread. Have...

Troy-bilt mower and electric PTO clutch [ 1 Answers ]

I am replacing the lower drive belt on my 23hp Troy-bilt pedal drive garden tractor. The last step in removing the belt is to remove the hex bolt from the center of the electric PTO clutch. When I try to loosen the hex bolt part of the electric clutch and the engine pulley turns at the same time....

View more questions Search