Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Open limit switch on Concord Gas Furnace
[ 14 Answers ]
I have a Concord 80 Plus Gas Furnace. I am starting the furnace for the winter and it gives me a LED code of open limit switch or limit switch circuit. Everything seems to work fine up until the point where the blower needs to turn on. I had the same problem last year but got a tech to fix it. I am...
3-way switch as transfer switch?
[ 47 Answers ]
Why are transfer switches so expensive? What's wrong with Using a 3-way switch for each circuit that I want to connect To my generator?
Transfer Switch
[ 3 Answers ]
Ok I am looking to add a transfer switch so I can run my generator when the power is out. I have always been told that my transfer switch needs to be rated higher then my generator's output. The problem is my generator has two output rating stated. In other words, a constance rating of 5,550 kw...
Schmatic of a transfer switch?
[ 2 Answers ]
I'm trying to find a schmatic of a 6 braker 20 amp manual transfer switch for mr 5000 what generator... I d like to see how they hook up and know just how they work... will I have to turn off my 200 amp main or will the manual transfer switch do it? Or maybe it don't get turned off?I did see...
Transfer switch
[ 6 Answers ]
I’ve recently purchased a Guardian 13kw standby generator with a transfer switch and load center panel. I have a couple of questions 1. The transfer panel had a total of 205 amps through 12 various breakers in it, can I replace some of them as long as I don’t go over the original 205 amps and use... View more questions Search
|