Ask Experts Questions for FREE Help !
Ask
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
     
    #61

    Sep 17, 2007, 07:12 AM
    Quote Originally Posted by MarthaA
    ScottGem:

    I do not care anything about conspiracy theories. The only thing I am concerned about is an experiment to see if regular air and jet fuel will melt a large steel tested I-Beam, not just turn the beam red in one spot, but melt it down to a puddle. I think the experiment should be conducted with the participation of Professor David Ray Griffin and Professor Stephen E. Jones, who I am sure would gladly participate.
    Y'know, no one has ever, in an official capacity, made the claim that any of the steel I-Beams melted or puddled -- Those are claims made by so called 'experts' who never once set foot on the sites.

    The official report maintains that the steel I-Beams twisted from exposure to flames in excess of 700 degrees, which is consistent with temperatures used to bend, form and fold steel in a foundry.
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
     
    #62

    Sep 17, 2007, 07:17 AM
    Quote Originally Posted by MarthaA
    Dark_crow:

    Facts of physics are not theories, but facts. Scientific principle along with cause and effect has to reign, rather than nebulous belief; regardless of your propaganda to the contrary.

    You should read the information on these sites. It is plain to see that you do not read. Once you pull your head out, you will find there are many shades of color other than brown, believe it or not there is a whole spectrum that in combination can form infinite color combinations. You are crowing in the dark.
    The problem with "the information on these sites" is that the information is being put forward by people who never once set foot on any of the sites in question.

    How can any of these people put forth conclusive theory's when they have failed to examine any of the hard evidence first hand?
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
     
    #63

    Sep 17, 2007, 10:05 AM
    Quote Originally Posted by Fr_Chuck
    Martha will not be joining us at least for now, there appeared to be multiple user names on her IP address. This is banned pending review.
    Oh gee, I was just about to share some of my knowledge from working in the paint industry. Paint factories and other structures well filled with hydrocarbons are always constructed out of poured concrete to reduce the damage in a fire. You need to go no further than the nearest concrete parking garage. Skyscrapers are built with steel because it is cheaper and stronger unless it gets too hot.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fan Blower not working in "ON" or "AUTO" in heat or AC [ 13 Answers ]

Got home from the Brewer game this afternoon and noticed the house was warm(78). Outside was 91. I checked the T-stat and it was set correct. Noticed the air vents weren't blowing anything. Went outside and the condenser and fan was running fine. Then I went downstairs to the furnace unit to see...

A/C or Heat does not work w/thermostat set "on" or "auto". [ 22 Answers ]

A/C or Heat doesn't work in "on" or "auto". Fan will not come on at the "on" position either. I changed the batteries in the thermostat. I also read somewhere to disconnect the "Y" and hold it to the "R" on the thermostat for two minutes. That will tell me if the thermostat is the problem. ...

Honda accord 2000 6 cyl " the light "check" is on" [ 1 Answers ]

My honda accord 2000 6 cyl. With 101000k miles is was with the light "check" on. I took To a non-honda mechanic and he erased it. The computer said that the code is PO700, and the mechanic said that it needs to have the "transmission rebuilt", and the price ranges from $ 1500.00 - 1600.00. My...

Can not "copy", "paste" and "cut" ! [ 2 Answers ]

Last week, my laptop was infected by virus, I sent for repair. After that, I couldn't find "copy" and "cut", and"paste" is in grey colour ! What have to do to have them back ? Can someone help ? Thanks in advance !


View more questions Search