Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to tighten loose chair legs
[ 5 Answers ]
I have a vintage (not sure if it qualifies as antique yet) Duncan Phyfe diningroom set I inherited from my mom. It was in pretty bad shape when I got it. I found an older gentleman who knew how to restore it. It looked beautiful when it was finished but now after a few years, all the chair legs are...
Toilet flange above floor level
[ 56 Answers ]
I've seen plenty about the opposite problem - maybe this is something less common: my toilet flange is above the anticipated floor level. I recently removed old tile from the bathroom floor, planning to install new tile. In so doing, I discovered that the old tile was set on about 3 inches of...
Toilet flange above the floor line
[ 1 Answers ]
We recently installed a new toilet after we remodeled the bathroom. The new flooring is approximately 1/2' lower than the original floor, thus leaving the toilet bowl flange sticking up. Are there "spacers" in the form of a porcelain plate to match the toilet that will allow the toilet bowl to be...
Replacing toilet floor flange
[ 3 Answers ]
I was replacing my toilet and found that my flange was rusted so much that I couldn't get the flange bolt on one side to lock into the flange so I must replace the flange. It's made of metal with ABS and obviously is glued into the ABS sewer pipe riser. I'm assuming that I need to get underneath...
Toilet flange below the floor level- URGENT
[ 3 Answers ]
Hi Guys, I just quickly reviewed all postings here trying to see if I can find an anwer to my question, but some things are too difficult for me to understand, as I am not familiar with the whole subject. I hired a plumber to install a new toilet in half a bath in the basement. The old toilet... View more questions Search
|