Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring Hot Tub and using a 50 Amp Double Pole GFCI Circiut Breaker
[ 10 Answers ]
:confused: I keep getting the GFCI breaker tripping after wiring my hot tub. I wired 2 hot Red and Black to the proper terminals and the White to the neutral and the Bare Copper to the ground Post at the tub. I am using 6-3 w/G per instructions. Could the GFCI breaker be bad? When I wire...
20 amp double pole gfci
[ 9 Answers ]
I am working on an addition and am installing a whirlpool tub. The tub requires 2 - 20 amp GFCI protect circuits: 1 for the pump and 1 for the heater. I ran 12/3 wire in the walls thinking I could have the BLACK wire go from 1 GFCI breaker to the pump outlet and the RED wire go from a 2nd GFCI...
Cable size ? Meter on pole 75ft to equip shed
[ 2 Answers ]
We have a mobile home meter on a pole at our farm (w/ 200 amp service panel) (installed just for this purpose, there is no mobile home on it and never will be) and we plan on running the power from here to our equip shed to a main service panel... then run off this to our small barn.. distance from...
Casablanca Fan with Single pole, triple throw, with off position
[ 3 Answers ]
Witch Color goes into which electrical connection: We have black, grey, pink and yellow colors and stations L-1-2-3 Thanks
Embedded pole foundations
[ 0 Answers ]
I am planning a cabin for part-time use. Does a pressure-treated, embedded pole foundation save that much over a reinforced footing and concrete block? To be sure of being below the frost line, I like the footing bottom to be about 32" below grade. Your input will be appreciated. Stoker View more questions Search
|