Originally Posted by
albear
you know this for a fact,because i have 2 C6-7s, and a B6-4,so will this work because i was wondering how i would get it to stay in the engine so it would ignite
Three ways to secure wire in engine (nichrome or Estes ignitors) -
1. After inserting the wire as far as it will go, stick a piece of wadding into the engine nozzle. The wadding, like the wires, will be expelled on engine ignition.
2. Tape (masking or cellophane) the wires in place; bend the exposed wire ends outward and tape them to the end of the engine.
3. The combo of 1 and 2 never fails to ignite the engine when the wire burns.