Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New AC installation - should both liquid and suction line dryers be installed?
[ 7 Answers ]
To make a long story short I've have a bad experience trying to get some repairs done to an existing aire-flow unit. $800 later I'm scrapping the unit. I've ordered (online) a new Rheem Classic 3 ton 13 seer condenser, coil and 100,000 BTU gas furnace. I am not going to try to install the unit...
Cloudy pool water can't get it clear
[ 3 Answers ]
Hi I have a easy set up pool with the inflatable top ring its 18ft round and 4ft deep and my water got really cloudy I brought a sample to the pool place he gave me some chemicals so I did what he said and it still was cloudy.I have all non chlorine chemicals in my pool.when I use a test strip in...
Suction part of line sets
[ 7 Answers ]
The 3/4" (insulated) lineset i have has a 6" rigid 90 degree end. Is that designed for the condenser or air handler end? It seems that it would fit in through the siding and give enough room to solder on from there to the ah. Otherwise you couldn't bend the tubing through the hole in siding and...
Check for suction line leaks
[ 1 Answers ]
My irrigation pump keeps losing its prime. How do I check for leaks in the suction line? View more questions Search
|