Ask Experts Questions for FREE Help !
Ask
    quickdraw39's Avatar
    quickdraw39 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 24, 2007, 07:54 PM
    Spin cycle on Kenmore washer
    There is a broken switch on the underside of my Kenmore washer preventing the spin cycle from working. How hard is this going to be to fix?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jul 25, 2007, 04:09 AM
    Shouldn't be hard. Just need to open unit up. Unplug unit from power source prior to working around electricity. Good Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washer noisy spin cycle [ 1 Answers ]

I have a Kenmore washer purchased Mar. 2001. The final spin cycle is very noisy (sounds like -but isn't- an unbalanced load) what should I check first?

Kenmore washer still has water after spin cycle [ 1 Answers ]

I have a Kenmore washer 80 series model 110, After the spin cycle finishes there is still some water in the washing machine. We restart the cycle and then all the water is gone. This doesn't always happen, sometimes it works fine. Any ideas would be appreciated

Kenmore washer wobbles during spin cycle [ 4 Answers ]

I acquired a used Kenmore 110-91552210. Don't know how old it is. During the spin cycle it vibrates and sounds off balance, does not walk. Doesn't seem to be effected by the size of the load. Can anyone help?

Kenmore Washer Won't Complete Spin Cycle [ 0 Answers ]

Hi, I have a Kenmore 110.4549290 that will agitate, and even will spin up to and including the start of the rinse cycle. It then drains the first rinse water, puts in a couple cups of water, but does not go into the rest of the spin cycle. The timer can be heard running (quietly), and it shuts...

View more questions Search