Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Sears Craftsman 11hp Lawn Tractor Transmission
[ 3 Answers ]
My Sears Craftsman 11hp Lawn Tractor Model #917 254 270 :when engine is running and clutch is disengaged,it will not shift to another gear. You have to turn it off and move tractor back and forth before it will shift into another gear. Any ideas what's causing this and what to do about it? Or, is...
Sears Model 917.256524 Lawn tractor 15.5 HP
[ 9 Answers ]
I have a 15.5 Hp Craftsman lawn tractor. It starts fine but when you push the blade lever up to engage the blades the mower dies. Also if you let out on the brake/clutch pedel the mower stops. Note: the blade safety switch is OK and so is the clutch safety switch as is the seat safety switch. Any...
17 HP Sears lawn tractor, Briggs and Stratton
[ 1 Answers ]
Not sure where to locate the Clutch Switch... I think this is my problem to starting the lawn tractor. Tractor Model # 917.270711.
Sears tractor
[ 4 Answers ]
I have a 19.5 hp sears tractor. Last year it didn't run well, so same this year. I changed the spark plugs, air filter, oil, fuel filter, took apart carb and cleaned all the goop out. I checked the fuel pump, but cannot tell if it really works, but I do have vacuum at the base of it. The...
Sears Craftsman Lawn Tractor
[ 4 Answers ]
I have a 10 HP Craftsman lawn tractor that will not move. The clutch works and it goes into gearbut the flat wheel spins and the gear wheel seems too have not enough pressure on it to move. Could this be just a loose drive belt? Thanks, Charlie View more questions Search
|