Ask Experts Questions for FREE Help !
Ask
    Fred44's Avatar
    Fred44 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 16, 2007, 05:56 PM
    John Deere LT155
    What is the procedure for changing a drive train belt on John Deere Riding Lawn Mower LT155?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jul 16, 2007, 06:09 PM
    First make a drawing of the way it is routed so you remember how it goes around the ldlers. Remove deck. Remove belt guide on trans. Remove 2 idler nuts. Remove idlers or lower them a bit. Remove belt guide at engine or remove nut and drop jacksheave/clutch whicever is easier for you.Remove old belt and replace with new one. Good Luck
    smiles4u's Avatar
    smiles4u Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jul 10, 2008, 06:41 PM
    How do you change the mower deck belt on a LT155 John Deere?
    phughesphoto's Avatar
    phughesphoto Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Jul 11, 2009, 03:41 PM
    Here is a layout that I keep handy for my POS John Deere LT 155 38" deck. . I loathe and despise mine and cannot wait until the day that I can replace it with even a no-name brand. I've renamed mine the John Deere LX BLZ model (doesn't take a rocket scientist to figure that out guys!) *wink

    Paula

    http://phughesphotography.com/LT155 Belt Diagram.jpg
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #5

    Jul 11, 2009, 05:57 PM
    Hi,
    Looks like two of you need diagrams. Note: If I had not been a Deere mechanic for years I may or may not have noticed the fact that it was two separate posts here; best to start your own!
    Peace,
    Clarke
    PS There are two slightly different 38" decks for LTs. This is the early one.
    Attached Images
      
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

John Deere replacement [ 10 Answers ]

Hi I have a JD L120 with 65hrs and a failed Hydro, Luckily its 23months old and will receive a new Hydro under warranty. As it has only lasted 1 1/2 summers I am sceptical to it's longevity. I mow a series of slopes covering 6 acres. I am interested in a replacement that will last, any...

John Deere JX75 [ 2 Answers ]

I hit a rock with my mower ,now the blade won't engage.The blade and motor move freely and the belt is tight,but the clutch doesn't seem like it's engaging.I took the blade off ,but can't figyre out how to get the clutch assembly apart.Thie is a 3 year old John Deere JX75 HELP THANKS

John Deere 160 [ 2 Answers ]

I took the floating deck off, when I put it back on, it will not move. I have an owner's manual, but it's no help. Does anyone know where I can get a diagram of how to reattach the deck? THanks, AWE

John Deere shuts itself off [ 3 Answers ]

John Deere tractor, L120, 3 years old. Tractor is shutting itself off after 45 minutes of use. It will restart only by keeping the choke and throttle wide open (to get myself back to my garage so I don't have to push it.) I THINK I eliminated a fuel problem, as I have blown out all fuel lines,...

John deere mower [ 3 Answers ]

Hi.my riding mower won't stay running.it will run fine for about five minutes then die,won't restart until it cools down after 30 minutes or so.I changed the coil,spark plug and have fresh gas in it.

View more questions Search