Ask Experts Questions for FREE Help !
Ask
    khtay's Avatar
    khtay Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 24, 2003, 11:59 PM
    How use AT command to set a modem default to voice
    Recently, I bought a headphone come with mic. I plug in the cable speaker and mic from headphone to my modem port (speaker & mic) accordingly. After I dialed a phone number, I can hear someone voice. I unable to speak to them. Why ? I got some advise from my friend that I need to turn on "duplex" mode using AT command. How to execute the AT command ? Any advise ? Thanks.
    shawvoel's Avatar
    shawvoel Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jul 9, 2003, 01:46 AM
    How use AT command to set a modem default to v
    Connect your modem to your PC Com port, open Hyper Terminal, type the name for this connection then select your modem, press OK.

    In next dialog, don't dial just cancel, type "ATE1", you can see anything unless you activate this command.

    To on the duplex mode, you have to refer from you modem menual for AT command.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ping not recognized as internal or external command [ 9 Answers ]

When running cmd C:\Documents and Settings\... \ping I get the following error 'ping' is not recognized as an internal or external command. Please help me solve my problem Thanks

How to Copy the contents in command prompt? [ 2 Answers ]

Hi, I have given a command in command prompt (say ant) and then it will be executing the files. My question is how to copy that which is in command prompt to a file say notepad. While I am running autobuilder\ant, it will be showing all that in command prompt and the process takes hours. I want...

Commands in the Startup menu in the MSCONFIG command [ 4 Answers ]

Would anyone please explain to me what these commands do, plus if it's possible, what consequence is going to happen if I cancel anyone of them from the startup menu. By the way, I have a toshiba laptop with XP home edition. Startup Item-------- Command NDSTray ------ ...

Dos Command Window [ 1 Answers ]

Hello Friends, I have scheduled a batch file to start of in the night. I want to see the DOS window to remain open and not close after execution. I want this this to check the next morning if all the actions went OK. Is there any command that can keep the DOS screen open till I close. Thanks...

View more questions Search