Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Older 220 volt wire
[ 13 Answers ]
I have an older 220v wire with only 3 wires... 2 hot and 1 ground/neutral (bare). I need to connect (splice) it to a newer 220v wire with 4 wires... 2 hot, 1 neutral (white), and a ground (bare). And older I mean less than 15 years old.
110v from a older three wire 220v circuit
[ 1 Answers ]
I have an older home that has a 220v outlet for a dryer that is not being used. The three wires are a white, a black, and a bare wire ground. (no forth wire) I would like to use this circuit for a 110v outlet. The "dual space" breaker for this circuit has the white wire on one connection and...
Hard wire 3 wire to 4 wire 220 service
[ 1 Answers ]
How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?
Hooking up an older 2 wire T87F to Rheem air handler
[ 3 Answers ]
Hi, Some Background: I have a Rheem heat pump air handler that used to be in my house and now I'm trying to install it in my shop. I removed the A/C coils and disconnected one of the heat strips. All that is left is a blower and 9.6kw heating strip. I was going to use the Rheem thermostat but I...
3-wire home, 3-wire fan, 2-wire remote
[ 9 Answers ]
Greetings, My home is 3-wire. I bought a Hunter ceiling fan (model 23811). The fan came with a remote assy. That I do NOT want to use... The fan has standard 3-wire connections (black, white, blk&white strip, ground). The remote receiver home-side wiring looks to be for 2-wire (blk and white).... View more questions Search
|