Ask Experts Questions for FREE Help !
Ask
    lostcause911's Avatar
    lostcause911 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 4, 2007, 07:39 AM
    14 hp lawn chief
    How do you replace the mower deck belt, I have the belt but can't seem to rout it through the pulleys correctly Thanks Ralph
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Jul 4, 2007, 08:30 AM
    Quote Originally Posted by lostcause911
    How do you replace the mower deck belt, I have the belt but can't seem to rout it through the pulleys correctly Thanks Ralph
    Get me the model # of your lawn tractor , and i will try and help you.
    Mowerman2468
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawn Chief [ 2 Answers ]

My mower blades engage when the cutting deck is lowered, it runs fine as long as I cut high, but if I lower it to low it starts to cut out even on the driveway. What could it be?

Lawn chief [ 3 Answers ]

We have a lawn chief 440 riding lawnmower and I do not have the owners manual and the person we bought it from has changed the seat so I can not get the model # all that I know is that it was built in 1992 and it says it is a 440 12.5 I/c 39 I hope that there is a way you can help me get a copy...

Lawn chief 12/39 [ 1 Answers ]

I bought a lawn chief 12/39 used.The problem I am having is it starts very hard and I usually have to jump start it.When I do get it started.I can drive around all day without problems and it can also sit idle with the mower running but when both are engaged it stalls.It has a 12hp briggs engine in...

Lawn Chief not running [ 5 Answers ]

:( I found out the mower is a Lawn Chief. But it will not run for very long. The carburator has new parts, the transmission is fine, but when it is started it will quit as soon as it is put in the run or idle position. Think it may be the motor, but any ideas on what part?

View more questions Search