Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring Hot Tub and using a 50 Amp Double Pole GFCI Circiut Breaker
[ 10 Answers ]
:confused: I keep getting the GFCI breaker tripping after wiring my hot tub. I wired 2 hot Red and Black to the proper terminals and the White to the neutral and the Bare Copper to the ground Post at the tub. I am using 6-3 w/G per instructions. Could the GFCI breaker be bad? When I wire...
Warm GFCI Breaker
[ 1 Answers ]
In our electrical panel we have 2 AFCI breakers next to each other. One is for the master bedroom the other is for 2 guest bedrooms. Each of these breakers is warm to the touch. We have had no electrical problems in either room and it has never tripped. I just thought it was strange that these...
Gfci
[ 1 Answers ]
Is there ever a situation where it makes sense to have a GFCI outlet on the same circuit as a GFCI breaker? Will having a GFCI outlet on the same circuit as a GFCI breaker cause any damage? I recently bought a house and found the situation noted above.
Gfci breaker popping
[ 8 Answers ]
After installing a second outdoor fan, I tied into an existing fan under an enclosed porch.I decided it would be smart to install a gfci breaker to protect them (vs the standard breaker). The circuit is tied into my kitchen an outdoor spot lights. With all the individual light circuits either...
GFCI on breaker panel trips, 3 way, how to find the problem?
[ 1 Answers ]
Periodically one GFCI in the panel trips This particular circuit runs an outside outlet, one light in the basement and it seems to work 2 switches and a plug in the family room The problem with the 2 switches in the family room at opposite ends are suppose to turn the plug off and on as a 3... View more questions Search
|