|
|
|
|
New Member
|
|
Dec 15, 2010, 04:56 AM
|
|
Sir, I want a centronic cable whose both ends are 36 pin male... it is a cen
Sir, *** tell me how can I make centronic cable whose both ends are 36 pin male centronic connector
|
|
|
Networking Expert
|
|
Dec 15, 2010, 09:14 AM
|
|
You could always buy one! Not sure how you would make one!
|
|
|
New Member
|
|
Dec 15, 2010, 09:20 PM
|
|
Originally Posted by ITstudent2006
You could always buy one! Not sure how you would make one!
My dear I tried to buy it even from delhi also,but it is not available in delhi because of its less use.now a days this type of cable is not used... if you know how to connect its both ends,then reply me.
|
|
|
Printers & Electronics Expert
|
|
Dec 19, 2010, 06:58 PM
|
|
Okay,
The Centronics Interface was never a 36 pin to 36 pin cable.
The original pin was a 25 pin female to a 36 pin Centronics "D" shell.
With the advent of IEEE 1294, or Bi-Di as it was called, the was a bi-directional cable that was a mini-36 pin cable.
Is that what you are asking about?
|
|
|
New Member
|
|
Dec 20, 2010, 03:27 AM
|
|
Dear donf sir, you are wrong.you are requested to visit a site http://www.cablestogo.com/product.asp?cat_id=913&sku=02682 in this site u are able to see the pic of centronic cable whose both ends are 36 pin.If u know how to connect these two pins.tell me
|
|
|
Computer Expert and Renaissance Man
|
|
Dec 20, 2010, 04:57 AM
|
|
Originally Posted by balu_ind
Sorry Don is right, but that doesn't mean that a 36-36 pin cable does not exist. But there are plenty of places that will make a custom cable for you.
|
|
|
Printers & Electronics Expert
|
|
Dec 20, 2010, 08:42 AM
|
|
Actually I did look at that cable and it for a Male to Male from a "Centronics Switch Box", not from a PC to Printer.
If you have such a box, you need to tell us!
So, please describe what you are trying to connect together.
|
|
|
New Member
|
|
Dec 21, 2010, 03:51 AM
|
|
donf sir, I'm trying these two ends of centronic connector which are 36 pins and both are male.
|
|
|
New Member
|
|
Dec 21, 2010, 03:52 AM
|
|
Please donf sir, tell me how these two connectors are connected... should I connect 1to 1pin and so on up to 36 pin to 36.
|
|
|
Computer Expert and Renaissance Man
|
|
Dec 21, 2010, 04:15 AM
|
|
As Don said we need to know the usage of the cable. It may be you need a straight through (1-1) or you may need to reverse (1-36).
|
|
|
Printers & Electronics Expert
|
|
Dec 21, 2010, 09:36 AM
|
|
A normal Centronics cable is a 25 pin female to 36 pin male.
A bi-directional (IEEE 1294) cable can be a 36 to 36, but the cable ends are much smaller.
If I were you, I would get an 18 pair of 22 AWG copper cable and do a 1 to 1 configuration.
Centronics depends on a signal leg to the device and a return leg back.
Good luck!
|
|
|
New Member
|
|
Dec 22, 2010, 07:24 AM
|
|
donf sir,why you don't get me... I have two 36 pin male centronic connector same as I have send you web address.I want to connect these two connectors... but how?
|
|
|
New Member
|
|
Dec 22, 2010, 07:27 AM
|
|
donf sir.*** see the site http://www.cablestogo.com/product.asp?cat_id=913&sku=02682
I have same connector,but I don't know how to connect.Sir I have electronic wheel aligner machines who have 36 oin.I want to connect it through printer which also have 36 pin.ok.I think know u get me.
|
|
|
Printers & Electronics Expert
|
|
Dec 22, 2010, 10:48 AM
|
|
No, I don't think I get you. If you have the same cable as is pictured in that web page, then you need a switch box to use that cable.
Just because a printer uses a 36 pin Centronics ended cable, does not mean that your aligners will use the same cable pattern.
What machines are you trying to connect, can you send me a description of the devices as well as the printer? What connection ports on the wheel aligners are you trying to connect to? Does the wheel aligner support the Centronics interface?
|
|
|
New Member
|
|
Dec 22, 2010, 09:00 PM
|
|
donf sir, I have wheel aligner hofmann 321 model which is 1997 model.for imafe go to http://www.warsztat.pl/pl/ogloszenie/96/przyrzad-komputerowy-do-geometrii-hoffman-4-glowicoey.html
This aligner has 36 pin port,it is not changeable.when I purchase this machine I have cable 36 pin to 36 pin centronic.but now it is damaged and misplaced.so I want a new one but in india it is not available in market due to its less use.
|
|
|
Printers & Electronics Expert
|
|
Dec 23, 2010, 07:32 AM
|
|
So write the manufacturer and ask them to send you new cables.
Or special order the cable from cables to go.
|
|
|
New Member
|
|
Dec 24, 2010, 07:15 AM
|
|
Dear donf,sirst I will tell you that 36 pin to 36 pin is a single cable,no centronic box is required.I have these two both connector but I don't know how to connect them.2-3 websites I see that they sell these type oc cable, I contact them but they want money through credit card which I don't have.I just want connection diagram only.but you also don't know.thanks... but you can't help me.
|
|
|
Printers & Electronics Expert
|
|
Dec 24, 2010, 08:13 AM
|
|
Excuse me, but I do know how.
If I wanted to, I could go down to the electrical supply store and pick up the parts I need and then build the cable.
I have absolutely no need of a 36 pin female to male centronics terminated cable.
You are the one who does not seem to understand. No company is going to send you a pin-out of their cable. Especially if the cable is patented here in the U.S.A. They will charge you it how they make money.
However, I gave you the best answer I can. I have no idea of the electrical connections used by your aligners.
I have told you repeatedly that a normal Centronics connector (male / "D" shell) connector is a pin to pin connection for a printer.
Why in heavens name you do not take the time to look at the 25 pin female port on a "PC" to verify the sending port is beyond me.
If you are asking foe someone to take the time to design a cable for you, it's just not going to happen, because there are patent regulations that can be enforced if you breach someone's design patent.
Also, it is a design issue. If you want to hire me, fine but this is information that is plainly available to you.
For goodness sakes, get a Ohm meter and do a continuity test to get your own mapping!
|
|
|
New Member
|
|
Dec 24, 2010, 09:53 PM
|
|
Sir pl visit the site http://iec-usa.com/m2200.html
*** listen me carefully: my aligner have 36 pin port,my printer epson lx 300 have also 36 pin.I need a cable which connect aligner and printer,the cable I need is 36 pin centronic connector both so that aligner and printer will connect.as I said earlier I have this type of cable but I lost it.so I want this type of cable.I searched a lot, in forign like usa I find a cable.but due to credit card procedure I'm not able to purchase.thats why I I know the procedure I will connect these two connectors in india also.
|
|
|
New Member
|
|
Dec 24, 2010, 10:04 PM
|
|
*** suggest me can I join other printer to aligner.but aligner have 36 pin port use only 36 pin centronic m cable.can I print it with using 25 pin to 36 pin cable.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Usb adaptor for 8 pin serial printer cable
[ 1 Answers ]
I am looking for an adaptor for my HP laserjet 4ML printer which has an 8 pin serial connector and I want to connect it to a computer that uses usb connections.
Printer cable adapters - 8 pin to USB?
[ 7 Answers ]
I have an old Apple LaserWriter 4/600 PS printer that works great. It uses an 8 pin mini DIN serial cable. I have a G4 Apple computer with USB and FW ports. I need some sort of adapter to hook these two work horses together. Is there such an animal? Is there another way?
View more questions
Search
|