Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pressure switch cutoff
[ 2 Answers ]
When we have high volume use, using several items at once, our pressure switch for our well is forced in an open position. In order to have water , we have to manually force switch closed, and it resumes operation. We have replaced switch, piping, and still have the problem. Everyone tells us it is...
Pumptrol regulator cutoff too high
[ 5 Answers ]
Hi, all! I have the familiar Pumptrol SquareD water pressure regulator; I don't have the model number, but it says 40/60 inside. We recently had to replace our well pump after learning that bladder tanks need to be checked annually :-( and the guy replaced our regulator as well. Unfortunately,...
I moved my well tank, now the pressure builds up too high and trips the relief valve.
[ 4 Answers ]
I moved my well tank to the crawl space. I replumbed everything with no problems. Turned the power on, the pump and lines are hammering. Pressure gauge reads 100 and relief valve trips. What is wrong?
Gas tank for 580.767300 High Pressure Washer
[ 4 Answers ]
Gas tank for model # 580.767300 high pressure washer; 6.5 hp. 2,400 psi, 2.2 gpm;
Well pressure tank too high pressure?
[ 1 Answers ]
The pressure switch on on well system started leaking recently so I replaced it. I noticed that both the old and new switch were clicking on and off fairly rapidly (every 10-15 seconds when a faucet open). Knocking on my pressure tank it sounded like it was full of water and I got zero air... View more questions Search
|