Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Charges against Illonois Governor
[ 2 Answers ]
What is Blago in the case against the Illonois governor
JX-75 Governor - mecchanical or electrical?
[ 1 Answers ]
How does the governor work on a John Deere JX-75 walk behind mower with Kawasaki engine? It was working fine for the last 4 years and suddenly the engine speed revs high enough with the throttle and stays at a constant level, but when going into heavy grass, the engine slows way down and does not...
8 hp B&S Governor and carb adjustments
[ 3 Answers ]
I have an 8hp B&S engine Model: 190432, Type: 6117-01, Code: 92093010. It is installed on a White chipper/shredder. It starts on the first pull every time (with choke closed). It runs smoothly until I try to open the choke, then begins to stall. If I close the choke it picks back up and sometimes...
Governor and choke b&s 9 hp
[ 1 Answers ]
I have a 9 hp b&s that will only run with the choke on full. Also need to know how to adjust governor
Governor
[ 1 Answers ]
Hi, well I am still working on the 16hp briggs engine.. got everything redone but can't get the cover on where the governor is attached.. is there a trick to getting it on, does the inside piece have to be in a certain position. When I slide the cover into place it lockes up the adjuster on top of... View more questions Search
|