Check out some similar questions!
Honeywell zone valve seems stuck open
[ 19 Answers ]
I manually opened one of my home's five Honeywell zone valves (V8043E-1012) by mistake. I meant to open a different valve. The one I opened had its thermostat set to its lowest temp setting, as it controls heat to a space I hardly ever heat. The next day the valve was still in the open position...
Weil Mclain 18yr old furnace - 1 "failed" zone of a 4 zone forced hot water system
[ 0 Answers ]
I just bought a house that was built in 1993 and has a gas fired Weil Mclain furnace, forced hot water, with 4 zones - each with a Taco Zone Valve. The system also has one circulator pump. In late fall, I ran the system and all zones worked fine. When winter came and system was on 'full time', it...
WiI am trying to find the wiring diagram for a zone valve unit of a gas hot water hea
[ 1 Answers ]
The copper pipes are hot, the motor is running, but there isn't heat coming upstairs. I believe the wires to the zone valves are either disconnected or misconnected. It is and MAerican Standard unit that is at least 40 years old. Thank you so much!
I have a weil-mclain boiler. The zone valve opens but no heat in zone. What do I do?
[ 1 Answers ]
Have replaced the zone valve actuator, but it doesn't seem to be fixing the problem. What else can I do? View more questions Search
Add your answer here.
|