Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heat pump voltage at outdoor unit
[ 0 Answers ]
Emergency heat works, ac works but outdoor heat pump doesn't come on on a call for heat. I have 24 volts to red and white wires at the unit. I've checked the ambient switches and their good. Don't know for sure that the problem is the board but red and white voltage going in and contactor doesn't...
Heat pumps and minimum outdoor temperature
[ 2 Answers ]
I had a heat pump installed a few months ago. The installer set the auxillery heat to take over at 25 degrees. The heat pump has no problem heating my house at this temperature, but I am worried that it is less efficient at these low temperatures than my gas furnace. My worry is not about the...
Setting low-temperature cut-out and balance point on Coleman Heat Pump
[ 5 Answers ]
I have a Coleman HC3B heat pump. The local service technician showed me the jumpers for the low-temperature cut-out (LTCO) and balance point (BP). It appears to be a set of pins with labels decreasing in value by 5 (45, 40, 35, etc.) which I assume are the temperature. I would like to...
New Heat Pump does not turn off at temperature setting
[ 3 Answers ]
I purchased a heat pump from a national company and it was installed in early January, 2008. When the thermostat is set, it will not get to that temperature, but usually stays 2 degree under and runs constantly. Only once or twice has it cut off by itself at the desired setting, and then only for... View more questions Search
|