Ask Experts Questions for FREE Help !
Ask
    bogey1964's Avatar
    bogey1964 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2012, 03:15 PM
    Goodman furnace gmpn080-4 no power to blower motor replaced motor
    Getting 110v to the transformer and purge motor but 0 volts to the blower motor from the circuit board
    Brsmith135's Avatar
    Brsmith135 Posts: 16, Reputation: 1
    New Member
    		  
    #2

    Jan 21, 2012, 10:23 PM
    Check the blower relay. If it works in cooling then the coil on the relay is bad. Replace relay
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Have a Trane xl90 furnace that I replaced the blower motor and capacitor , [ 0 Answers ]

, now blower won't shut off. Any ideas?"

Has anyone upgraded their Furnace Blower Motor to the new Emerson Eco Motor? [ 0 Answers ]

The Eco Motor is supossed to be much easier on the power consumption.

Goodman furnace will ?heat motor? And blower motor will run but not at same time [ 2 Answers ]

I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?

Goodman Furnace Blower Motor Stays On [ 3 Answers ]

Hello, our Goodman furnace is malfunctioning. The blower motor runs non-stop. We are getting pretty cold now, it has been several days. I disconnected the thermostat and it made no difference. I suspect it may be a bad sensor, but do not know which one. The furnace is only 5 years old or so and we...

Goodman AC/Furnace: condenser not coming on after installation of new blower motor [ 6 Answers ]

Have and outside Goodman AC unit and Goodman furnace (inside duh!). Anyhoo, after installing new blower motor the AC unit will not kick on. Have reset outside breaker, and double checking wiring on controller board on furnace, noticed one blue wire was disconnected, reconnected that and still not...

View more questions Search