Ask Experts Questions for FREE Help !
Ask
    trc829's Avatar
    trc829 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 7, 2006, 07:20 AM
    Wire for electrical stove
    Hello can you tell me what size # wire I need for a 220 that an electrical stove will run off? The breaker is a double 50. I think that the wire that is there now is too small for the breaker. I think that when more than one burner is in use they don't work properly. One will cool down while the other is hot etc. Thanks!
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Jul 7, 2006, 12:35 PM
    A 50 Amp breaker should have a wire no smaller than #6 copper connected to it. Judging by the symptoms you notice,I think there may be a problem with the internal wiring of the stove. You may want to try posting this problem in Appliances , just provide a bit more detail, such as make and model number of the stove.
    trc829's Avatar
    trc829 Posts: 2, Reputation: 1
    New Member
     
    #3

    Jul 10, 2006, 07:10 AM
    Thanks for your help! I will look into that.
    richardic's Avatar
    richardic Posts: 4, Reputation: 1
    New Member
     
    #4

    Feb 18, 2009, 06:19 PM

    I have gas stove and I'm thinking serious about changing to electric stove, gas here is $3.24 gallon and change Dryer to electric too!!
    So what do I need to prep installation for electric appliances? What type of wires outlet and braker please?
    I don't know the brand on any appliances yet, but this make differences on wires?
    From each appliance to electrical box is about 30 feet.

    Appreciate if you can help me on this!!
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #5

    Feb 18, 2009, 06:56 PM
    Before I'd advise on wire and circuits, I must ask. Did you calculate the payback time from buying both large appliances, having the circuits run, and the cost of running them??

    I know of NOWHERE that electric is or would be cheaper than gas, with the exception of Canada who's electric is generally very cheap.
    richardic's Avatar
    richardic Posts: 4, Reputation: 1
    New Member
     
    #6

    Feb 19, 2009, 07:28 PM
    Here where we leave on local news paper on Bargain Box add always have Dryer and Stove for FREE! I’ll just going to buy wire and breaker and have my Landlord to connect then!! What do you think? Great right?! Now on winter my gas bill are around $500 a month on summer goes to $500 every 3 months
    richardic's Avatar
    richardic Posts: 4, Reputation: 1
    New Member
     
    #7

    Feb 19, 2009, 07:31 PM

    What do you think? You are the professional, should I or not change then?
    Thanks
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #8

    Feb 19, 2009, 07:39 PM
    Electric appliances are more efficient. That being said, they can easily cost 40 to 80% more to operate because of electric utility costs. Only in residences that are "all electric" do utility companies offer special rates which may make electric appliances a good deal. But to change over..? Not usually fiscally viable.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #9

    Feb 19, 2009, 07:50 PM
    Quote Originally Posted by richardic View Post
    here where we leave on local news paper on Bargain Box add always have Dryer and Stove for FREE!! I’ll just going to buy wire and breaker and have my Landlord to connect then!!! What do you think? Great right?!!! Now on winter my gas bill are around $500 a month on summer goes to $500 every 3 months
    I'm sorry. I have no idea what this means. :confused:
    richardic's Avatar
    richardic Posts: 4, Reputation: 1
    New Member
     
    #10

    Feb 19, 2009, 08:02 PM

    So do you think is great idea? What wires and brakers should I buy?
    I think I'll save money I just put the original appliances back when I live the house!! Man propane its kiling me! I'll broke if continue like this!! 3.24 gallon
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #11

    Feb 19, 2009, 08:14 PM
    If this is a rental you should NOT be buying ANY wire or breakers. This is a job for an electrician, not a renter.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Janitrol 7 wire to Honeywell RTH230B 5 wire [ 3 Answers ]

I currently have a Janitrol digital thermostat. I can't read the model #. It has 8 terminals and 7 wires hooked up. Terminal - Color Y - Yellow Com - Blue R - Red G - Green w2 - Looks white E/w3 - Looks pink O - Orange B - Nothing

Neutral wire is hot(has voltage potential like the black wire) [ 5 Answers ]

Hi, The problem started at midnight last week. One of my line in the basement is starting to have issue whenever I connect a water pump or appliances to the outlets. Before I plug the appliance in, the neutral is neutral(zero voltage), but when I plug the appliance in, the neutral is now...

3-wire home, 3-wire fan, 2-wire remote [ 9 Answers ]

Greetings, My home is 3-wire. I bought a Hunter ceiling fan (model 23811). The fan came with a remote assy. That I do NOT want to use... The fan has standard 3-wire connections (black, white, blk&white strip, ground). The remote receiver home-side wiring looks to be for 2-wire (blk and white)....

4 wire home service entrance wire size [ 1 Answers ]

Mobile home requires 4 wire electrical service entrance wire. Distance is 160 foot from meter to breaker panel. 220V service. What size wire do I use? Can I use diff. size for neutral and ground?

2 Wire White-Rogers with no wallplate wire question [ 2 Answers ]

Hi there. I want to replace my current White-Rogers 1E56W309 thermostat with a new Honeywell RTH7500D. The problem is that the tools that installed my high efficiency furnace didn't install the wall plate with my thermostat (it was a new house and the builder contracted these guys). Instead,...


View more questions Search