Tests on electronic ballast

akbhalara Posts: 1, Reputation: 1

New Member

Nov 26, 2009, 01:42 AM

Tests on electronic ballast

I want to know what would be the voltage across fluorscent lamp ignited with electronic ballast?

KISS Posts: 12,510, Reputation: 839

Uber Member

Nov 26, 2009, 08:43 AM

Electronic Ballast Design

Add your answer here.

Check out some similar questions!

Faint Positive tests and then negative tests [ 4 Answers ]

Here is my situation. First of all, you should know that I'm on Metformin because I have very irregular periods and am borderline PCOS. Now for the tests. The first day of my last period was Oct 21st. This is not uncommon for me to be this late, but I took a test anyway to see if I was...

Occupancy sensor, fluorescent light, electronic ballast, and relay [ 13 Answers ]

Hi! I'm at my whits end with this one so here goes... I'm currently installing recessed fluorescent T8 2-lamp fixtures in my garage, one of which I want to have powered by a Leviton PR180 occupancy sensor. After my initial installation attempt, the fixture flickered and it was then that I...

Electronic ballast [ 1 Answers ]

How do I test an electronic ballast

My ballast won't work I think do to 120V supply when it's a 240V ballast will this work [ 6 Answers ]

I have a 240V 60Hz 600W ballast and Im trying to hook it up in a small nursury room in my home. I like in California so I think the V ac is 120. Can I use this converter on the top of this page. Will it work if I plug it in to the wall that supplies what I think 120V. I think this because on the...

New ballast bad? [ 3 Answers ]

I just installed a 4 bulb light fixture in the grage (110V) using a 4 bulb ballast. The problem I'm having is one bulb doesn't come on. I've changed bulbs and still the samething. I'm thinking it probably the ballast. Any ideas? Omar