Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to remove single valve handle - Delta Shower
[ 48 Answers ]
I've got the Seats & Springs to fix a leaky Delta Monitor 1400 Series faucet (and the water is turned off), and am stuck at the very beginning. The handle is a single lever, it appears that the Set Screw is missing. I've tried twisting the lever and pulling without success - not knowing which is...
Replacement rough in valve for delta single handle 636?
[ 1 Answers ]
I have a delta single handle shower valve, that I believe is a 636 or award collection model. It is leaking where the small copper tubes attach behind the handle. I understand that this was a common problem with this particular valve and that delta made a new and improved replacement valve or...
Hello. I am trouble shooting a Delta single handle shower problem. The shower is
[ 3 Answers ]
Hello. I am trouble shooting a Delta single handle shower problem. The shower has a diminished flow and over the past 6 months or so has become so hot that it appears that the cold water flow has been restricted or cut off. I think my solution is to replace the cartridge (I think Delta RP19805)...
Delta 1400 Series Single handle shower
[ 9 Answers ]
I recently replaced the cartridge on my Delta 1400 series monitor single-handle faucet, and everything seem to have gone in to place OK, I did have some trouble removing the handle and the clamp brass ring initially as it had not been moved since installation (2002), but now when I turn on the...
Delta single handle shower removal
[ 2 Answers ]
I have to replace a cartridge in a delta single handle shower. It is a one piece lever. It has a set screw on the inside bend of the handle. I have removed the set screw and the hard water corrosion will not break allowing the handle to pull off. I have tried boiling hot vinegar, along with a... View more questions Search
|