Ask Experts Questions for FREE Help !
Ask
    socal's Avatar
    socal Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2008, 01:42 PM
    Furnace won't ignite
    I have a Comfortmaker RPJ Heat Exchanger. It won't ignite. I tried the troubleshooting instructions on the unit and it won't work. I remember there was another switch that may have done the trick before but can't locate it. ANy suggestions?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Dec 13, 2008, 01:47 PM

    Any response from unit when turned on? Clicking, humming, motors running, etc.
    socal's Avatar
    socal Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 13, 2008, 04:06 PM

    No, there is no sound clicking,humming, nothing.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #4

    Dec 13, 2008, 04:16 PM

    Have you checked basics (power supply, etc.)?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My furnace won't ignite [ 5 Answers ]

I'm trying to find out why my furnace won't ignite. The pilot light is on, I can hear something turn off when I checked the breaker and it came back on when I turned the breaker back on. If I turn the fan to on it works. I'm thinking it's the thermo coupler but I don't know how to test that. ...

Gas Furnace will not ignite [ 9 Answers ]

I have a Goodman gas furnace, Modal no. GMP075-3. When the heat is turned on the blower motor turns on but the ignitor doesn't get hot or glow like it's getting hot. I don't think that the gas valve is opening as I have tried to light it with a open flame. Please help me, it snowed last night and...

Furnace won`t ignite [ 1 Answers ]

I have an Armstrong Natural Gas Furnace,and the orange hose that goes to a sensor doesn`t work sometimes, and the furnace blows cold air. If I blow in the hose, it will work the next time, but I can`t do this all winter. It gets cold in the middle of the night.

Furnace won't ignite [ 3 Answers ]

Hey guys, I've been looking through these forums but haven't found an exact answer to my question, so figured I'd start my own thread. I have an American Standard gas furnace that uses a glow plug-style ignition system to light the gas, but the furnace only blows cold air. Let's see if I can get...

View more questions Search