Ask Experts Questions for FREE Help !
Ask
    golfboy's Avatar
    golfboy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 30, 2006, 04:48 PM
    Frigidaire front loader
    My basement recently flodded and I think it damaged the front loading washer I have. When I plugged it back in it seems to work, but the washer doesn't spin... it just fills with water and then nothing... no washing, no spinning.. no nothing!

    How can this be repaired ?:(
    applguy's Avatar
    applguy Posts: 324, Reputation: 23
    Full Member
    		  
    #2

    May 30, 2006, 09:18 PM
    I don't know how quickly the basement flooded or what the source of the water was, but I'm wondering if the washer was running when it flooded and how high the water got? What I would do to start with would be to set the washer for a spin, take the back off and see if the motor is trying to run. I don't know if this is how you would access the washer motor, because I don't know what model your washer is. You might post that next time. Let me know what happens.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washer front loader [ 4 Answers ]

Hi, I have a Kenmore front loader washer that is five years old and is now making noises (periodic squealing). I removed the back panel and it looks like the belt is rubbing into the container. Can this belt be adjusted or am I looking at replacing this machine? Love the Kenmore, but cannot...

Frigidaire [ 8 Answers ]

Does anyone know who the bran name maker of Frigidaire appliances might be and whether they're any good, reliable etc, etc? Thanks for any info, Kae

Kenmore elite top loader will not spin... [ 2 Answers ]

I have a Kenmore Elite (calypso) Model#110.21062000 that will not move from the rinse cycle into the spin cycle. It will give to different error codes occassionally: 1) "LD" - long drain, 2) "SL" - suds lock. In both cases the unit appears to be draining without any difficulties as observed by the...

Frigidaire front loader not spinning [ 1 Answers ]

I've checked out the motor resistance and everything checks out to spec. except for the stator winding which reads 1.7 ohms instead of the specified .37 ohms. Any thoughts on this? The speed control board test was passing 120v until I got to the test for pin 3 of the 9 pin plug to pin 4 of the...

View more questions Search