Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Difference between Main Lug and Main Breaker Panel
[ 8 Answers ]
What is the difference between a Main Breaker Panel and a Main Lug Panel and can either be used in new residential construction.
Convert Main Panel to Subpanel?
[ 3 Answers ]
After rough-wiring my old house to a new 200 amp Main Panel (wired-in but not yet connected to the service line and still using the original 100 amp fuse-type panel) I've decided to build a major addition that makes the originally planned service entrance a poor location. Question: Can I...
New 15A breaker trips main 100A breaker
[ 6 Answers ]
Hi, I've been finishing my basement and I added a few 15A breakers One room has 8 outlets in series with the first starting about 6 feet from the main panel. There is currently no load on this outlets. When installing the drywall I accidentally shorted the outlet closest to the panel. It...
Main breaker and main disconnect
[ 2 Answers ]
What I have is a home built in 1960 moved in 2 years it had a meter hanging from the rear of house with no main, 240v 50amp circuit to stove, 240 30amp to dryer, 5 breakers for the rest of house 1 20amp and 4 15amp. What my plan is to replace the meter housing and put a g.e. 200amp Disconnect on...
Garage main lug only height
[ 1 Answers ]
Hi, just wondering if there is a minimum or maximum height for the main lug only box when surface mounted on a wall in a detached garage? I am running 40amps, 240V service underground to the garage. THanks in advance. Regards, Steve View more questions Search
|