Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pipes noisy after replacing fill valve
[ 1 Answers ]
Had new fluidmaster fill valve put in to fix a leaky toilet, and now there's a loud banging noise in the pipes (that was never there before) and not only after the toilet is flushed, it's pretty much intermittent throughout the day. Can't sleep at night... Help!
Unable to remove bad smell from toilet
[ 2 Answers ]
Hi - I have a new home (2yrs old) and no matter how much I clean the master toilet it always has a bad smell. My spare bath doesn't have the same problem and it gets cleaned less. I've even tried an 'industrial' type cleaner from Lowe's, but after a few days the smell returned. I also notice...
Fill valve for toilet
[ 3 Answers ]
I replaced the fill valve and flapper in toilet, but when I turned on the Water, it does not fill up the tank quickly. There is water through the Tube, but it jut "trickles" into the tank!
Pressure from toilet valve will not fill toilet tank
[ 1 Answers ]
I have recently had a soft water installation put in. The shut off valve is conveniently close to the garage where the clean water tank was installed. Anyhow after the installation was completed pressure worked great in every room except the master bathroom toilet. The dual sink, the shower, and...
Toilet fill valve
[ 3 Answers ]
I replaced the fill valve in my toilet and the water will not fill up in the tank. When I disconnect the pipe between the shut off and tank, I can turn the water "on" and nothing happens. The sink and shower both work but the water won't go to the toilet. What can I do to fix this problem? View more questions Search
|