Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Producing 120v but no current...
[ 2 Answers ]
I have an Onan gen set that is producing 120v but when I put a load on it isn't producing current. It is a 3ph in a "Y" configuration 120v/240v When running with the breaker is off it shows 120v on all 3 legs to ground. When I turn the breaker on it drops to about 60v the more lights and...
120V heater tape off a 240V source.
[ 3 Answers ]
Hi, My question is very similar to HandyJohn's and much my question was answered in is post. Mostly verifying my suspicion of needing a step down transformer here. Just wondering if you know of any simpler options I may be overlooking outside of running a dedicated line. Here's my...
Wiring 120V light from 240V source
[ 6 Answers ]
I currently have a well house that has a 240V source on 12-2 wire powering a submersible well pump. I would like to wire in a 120V light. Can this be done using the 12-2 wire already in place or do I need to remove the 12-2 wire and install 12-3 wire? (It is approximately 60ft from the main house... View more questions Search
|