Ask Experts Questions for FREE Help !
Ask
    monkavetto's Avatar
    monkavetto Posts: 7, Reputation: -1
    New Member
     
    #1

    Jan 5, 2009, 09:33 PM
    Amana Temp Assure?
    First off, thanks for everyone's help with my washer that wouldn't spin. It was the motor coupler. $20 part and 15min worth of my own labor with basic hand tools... GREATLY APPRECIATED! Now, on to other pressing issues... I have an Amana Temp Assure Refrigerator/Freezer where the freezer is on the bottom. I think the condenser may be bad, but whatever it is, it has a fairly loud humming noise. I have always described it as a small gas motor, but I'm exaggerating that I'm sure. Any ideas on what exactly it may be, or where to start? I don't have a model number, as I coundn't find it, without pulling the beast out of the hole in the wall...
    Thanks in advance!

Check out some similar questions!

Heat not kicking on until the temp dips below 64 degrees, target temp set to 72 [ 2 Answers ]

Hello, This is my first time posting here, but I figured it was a good place to start for some advice. I just bought a new townhouse a few weeks ago and have been having some heating issues since moving in. The actual furnace (Goodman GMS 8045) was installed in June of '06 while the unit was...

Furnace not kicking on when temp drops below thermostat set temp [ 1 Answers ]

I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ...

Differential of return temp and cooled exit air temp [ 1 Answers ]

Here is the problem I am having, I had a new unit installed last year on my new house. I noticed that the compressor runs for a long time and shut off for a short period. This got my attention and wondered if the unit is running efficiently. I had my doubts from the start since the A coil looked...

Serial com how to assure it is working properly? [ 7 Answers ]

I have got new laptop Dell Latitude D620 with win2003 OS SP1 all updates installed. I have been experiencing a problem: when I used two emulators : HyperTerminal or SecureCRT, I can not connect to Cisco devices ( not only one device,, that means there is no possibility that a device is...

Temp gauge showing temp, 2001 Chev Malibu [ 13 Answers ]

I have a 2001 Chev Malibu LS, V6, temp gauge is not showing any heat at all, not registering when I know the coolant is hot ? Veh has about 126000 mi on it, never been flushed out, thought I would attempt to flush myself but don't you think the problem might be a bad thermostat ? If so, where and...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.